An Akasa Eclipse slow build ZZZAC

Been a while since an update
And i may need to get a poll coming to sort some of theese ideas
So heres a list of my plans
*"7950 DCII" replaced with "7950 DCII V2"
* Maybe a set of Orange and black extensions
* Beefy new heatsink
* New Ram-8gb 2133mhz
* Replace the side window with a new tinted acrylic?
* replace case fans
* find a way to isolate the hard drive
* get a fan controller depending on fans?
* Vinyl wrap the entire case-what colour guys?
* maybe change the top pannel?

Please input any ideas, as you can see im unsure about allot of these.
Thanks
 
The 7950 is, in my opinion, one of the best cards on the market, when it come to price v.s Performance

Yes! i know
i cant justify upgrading to the 7970 for the extra money id loose.
Though my 7950 is design faulted so ill drop a 7970 (currently being RMA'd) when its back and get my 7950 replaced as its a design faulted one with a heat sink issue so asus are replacing it for me.
 
So turns out i was on santas nice list this year...
What could this box be?
img0535j.jpg

A wild upgrade appears
img0536mh.jpg

whate and black fans? thought they were pink and red.... lol
img0534sy.jpg

and the biggun
img0533wy.jpg


Not knowing how the heatinsk mounted i got really worried the anchor plate wouldn't fit due to all the components around the cpu area.
img0532bw.jpg

And after lots of pulling and prying getting the old backplate of, i slapped the new one on!
img0537lt.jpg

spacers and anchor plates installed
img0538tu.jpg

and the heatsink just fits!
img0539xr.jpg

Fans on! (set in pull-push-pull so i can access all ram slots, as i may go 16gb)
img0544cs.jpg

and system back together. getting the wifi card in was really really tight!
img0546pw.jpg


And ill reeve you with this.
img0548g.jpg


Ofcourse i was expecting to get more done... but my new cables are in the post and i need to order some more stuffs to keep updating the rig!
So.... Merry Christmas, sorry the update is not so big :)
 
Braiding update today anyone? ;)
EDIT: Out of solder, broken soldering iron, out of tape, out of heat shrink. and out of energy.
probably need to go to town to get some modding supply's today :)
EDIT2: ive actually broken my budget... i cant afford what i was hoping to get- hence things will get even slower :(
 
So, last night i got some new extensions, no heat shrink, and more fabric than my cheapy set, all in all, happy chappy :D
img0554rr.jpg

Plated the 6 pins
img0556p.jpg

quality of braid comparison
img0559at.jpg

24pin and 8 pin in- realised i wouldn't be able to get the fan on the back without taking the motherboard out, so i shoved it on the front. DERP
img0562hw.jpg

quick break?
img0563ks.jpg

eventually i got to the time consuming front panel and usb connectors.
img0567mp.jpg

oh, and braided sata power (need to braid the sata cable black too! (or replace it)
I still have the power LED's and hard drive led's to do, but im out of solder and heatshrink so that will have to come another time.
img0570sr.jpg

and i leave you with a side panel on picture
img0571sf.jpg
 
Been meaning to go into town and put some money on my card to order some stuffs on line!
sorry for the lack of progress
 
Right, im looking for advice on what vinyl wrap should use, so ima throw a few pictures at you and see witch ones are more popular
only the outer panels will remain black, i may have my second chassis power coated sometime in the future- (not for a while).
Two of my mates have suggested a fully flat black wrap
updatetest5.jpg

I thought white carbon would be cool- i do think its a little too full on for my build.
uupdatetest5.jpg

Black carbon would suite my build but its pretty generic by now and its been done before.
updatetest4.jpg

And finely this, i think it looks the dogs danglers, as well as would suite the case- especially after the shaded acrylic is put in, but im doing this to get feedback and other peoples ideas
updatetest2.jpg

updatetest3.jpg
 
Please guys help me out and give me input on this!
P.S- Any way to add a poll? i know there was before lol
 
This is a good place for vinyl : Flaming Wheels I used them to wrap the inside and out of a pc case and it only cost me £5 :D Definitely go vinyl wrap, you wont regret it! I think that chameleon carbon fiber would look awesome on that case, i would do the out side carbon too :D Your braid is awesome too!
 
This is a good place for vinyl : Flaming Wheels I used them to wrap the inside and out of a pc case and it only cost me £5 :D Definitely go vinyl wrap, you wont regret it! I think that chameleon carbon fiber would look awesome on that case, i would do the out side carbon too :D Your braid is awesome too!

I said im doing the outside only. i may get the internals finished properly- but its way out of my budget.
only £5- surely that was a small pc case then?
My side panels are like 450mmx550mm!
but yeah im thinking the chameleon.
 
I said im doing the outside only. i may get the internals finished properly- but its way out of my budget.
only £5- surely that was a small pc case then?
My side panels are like 450mmx550mm!
but yeah im thinking the chameleon.

It was a m-atx case lol, best of luck! :D
 
Back
Top