A question about Alphacool D5 Top

Nicz

New member
Hi guys,

so i finally got a D5 pump + Alphacool D5 Top (Plexi)

I have one problem with the top, Alphacool didn't mention where the inlet/outlet ports are. :confused:

If I use the top as in this picture:

Alphacool_zps686717fc.png



then which port is the inlet and which port is the outlet?

Thanks in advance.
 
What about the arrows on the front?

I used to have the same block - the ports in the middle on both front and top are inlets.

The ones off centre/in the corners are the outlets.
 
What about the arrows on the front?

I used to have the same block - the ports in the middle on both front and top are inlets.

The ones off centre/in the corners are the outlets.

yea well i didn't understand what the arrows mean :D
Thank you.


One more question, The pump i got comes with a blue wire, does anyone know what it is?

IMG_6439.jpg
 
Tacho wire - plugs into your motherboard so you can see what speed the pump is running at...

Cut it off - you're a n00b if you use it anyway.
 
Back
Top