3 Way SLI Bridge VI Formula

[dhoom]

How do i set up 3 Way SLI on my ASUS Maximus VI Formula ?

Between PCIe_1 and PCIe_2 there is 6 cm. Between PCIe_2 and PCIe_3 there is 4 cm. From PCIe_1 to PCIe_3 there is 10 cm.

How am suppose to do that ? I still want it to look good!!

 

[maniac]

just use two single flexible sli bridges from the 1st card to the 2nd, and from the 2nd to 3rd card.

 

[theDTP]

just use two single flexible sli bridges from the 1st card to the 2nd, and from the 2nd to 3rd card.

^ this, from 1 to 2 and from 2 to 3.

If you want it to look good, then cut a piece of plexi or aluminium to the total length and width of the 2 bridges and use some double sided tape

 

[netwalker]

How do i set up 3 Way SLI on my ASUS Maximus VI Formula ?

Between PCIe_1 and PCIe_2 there is 6 cm. Between PCIe_2 and PCIe_3 there is 4 cm. From PCIe_1 to PCIe_3 there is 10 cm.

How am suppose to do that ? I still want it to look good!!

You do not need to worry because this board is only 2 way Sli compatible. It is however 3 way XR compatible tho.

Cheers...