2600k Over clock help needed

[yassarikhan786]

Are you using xmp? If so, just set the frequency and timings manually and you should be good.

 

[S_I_N]

and vcore shows 1.344 normal 1.35 on load but when i validate it goes to 1.368

thats totally normal bro so ur oc is actually 4.6GHz at 1.368 vcore thats what the board has determined it needed to stabilize ur oc with the parameters you set in bios.

 

[Big-Boss]

Thanks Yass

I enabled xmp profile and its what it supposed to be

also i lowerd my vcore by .5 and is still working

i set it to 1.34 il try 1.32 now and see what it does

 

[Big-Boss]

done guys working

set temp to 1.32

below are screen

Normal without prime 95(max temp says 70+ is that bad or good)



Uploaded with ImageShack.us

on Load





Uploaded with ImageShack.us

cpuz sees vcore as 1.344

 

[yassarikhan786]

Those are some awesome temperatures mate. How long did you run the test to see those temps?

 

[Big-Boss]

ii crashed on me after 10 mins bsod

just set it to 1.33 see how long it lasts

if not il stick with 1.34

 

[yassarikhan786]

yep, just increase the vcore by .01 until you are stable.

 

[Big-Boss]

no i think il stick with 1.34

at 1.33 pc shut down after 30 mins

dont know if that was something else or not but 1.34 vcore it is