Go Back   OC3D Forums > [OC3D] Project Logs & Gallery > Project Logs
Reply
 
Thread Tools Search this Thread Display Modes
 
  #1  
Old 23-03-17, 08:37 AM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Tempest (modded CM MasterCase Maker 5t) by SimpleModz

Hey guys,

Welcome back to another one of my builds logs! I'm happy to announce my entry into the 2017 Cooler Master CaseMod World Series in the MasterCase Maker 5t. It's a stunning looking case and I'm excited to work on it. I have a few interesting things planned for it, including some layout changes on the inside and a more unique water cooling loop set-up.

I am calling this one Tempest and it will be based on the Tempest spaceship from the new Mass Effect Andromeda game.

I did an overview video of the case as well as talked a bit about the mods where you can get a better idea of what I'm going to do in this case.

Check it out below:



SPECS:

Case - Cooler Master MasterCase Maker 5t
CPU - Intel TBC
MB - ASUS Rampage V Extreme
RAM - 8 x 4GB Crucial Ballistix Elite 3000MHz DDR4
GPU- NVIDIA TBC
SSD -2 x 275GB Crucial MX300
HDD - Seagate TBC
PSU - Cooler Master V1000

Custom cables & lighting - CableMod

Water Cooling - Bitspower

I'll start it off with some photos of the gorgeous case:







































Thanks for checking it out and stay tuned for more

Cheers,

Alex

Reply With Quote
  #2  
Old 23-03-17, 09:03 AM
Excalabur50's Avatar
Excalabur50 Excalabur50 is offline
OC3D Elite
 
Join Date: Apr 2011
Location: Australia
Posts: 6,608
Watching!
__________________
DRAGON'S MIST
Coolermaster H500P White ARGB=AMD Ryzen 5950X=MSI Prestige X570 Creation=Intel Optane SSD 9 480GB PCIE=32gig 3600Mhz White Dom Plats RGB= MSI RTX 3080 Gaming X Trio=Coolermaster ML360R ARGB=MSI Optix MPG341CQR=Roccat AIMO 122=Corsair Force LS 960GB=Roccat Kone AIMO White=EVGA Supernova 850 G2=White Sennheiser Game One=NZXT Hue+ with RBG strip=Windows 10 Pro=Thrustmaster T16000M HOTAS=MSI Agility GD60 RGB Mousepad=Chasepower Pure Sinewave UPS
Reply With Quote
  #3  
Old 23-03-17, 12:21 PM
Bartacus Bartacus is offline
OC3D Elite
 
Join Date: Apr 2013
Location: Ottawa, ON, Canada
Posts: 2,722
Saw Tempest, got excited thinking it was a reference to the old table-top polygon game, but was disappoint!! I'll watch anyway, since OP goes great work.
__________________
Games: Ryzen 5950X on GB Aorus Master X570 / Asus TUF 6900XT / 32GB TridentZ Neo 3600CL16 (16GB x 2) / custom loop
Workstation: Threadripper 2950x on GB Aorus Xtreme X399 / Zotac 2080ti / 32GB TridentZ 3200CL14 (8GB x 4) / custom loop
Home Theatre: Ryzen 3900X on Asus C7H X470 / Radeon VII / 16GB G.Skill 3600CL15 (8GB x 2)
/ custom loop
Reply With Quote
  #4  
Old 23-03-17, 02:44 PM
Dawelio's Avatar
Dawelio Dawelio is offline
OC3D Elite
 
Join Date: Aug 2014
Location: Scandinavia
Posts: 5,281
New build one, nice!

Although I gotta say that it looks to be basically nothing new with every new release of these "Master" cases lol.
Reply With Quote
  #5  
Old 24-03-17, 12:14 PM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Quote:
Originally Posted by Excalabur50 View Post
Watching!
Thanks mate

Quote:
Originally Posted by Bartacus View Post
Saw Tempest, got excited thinking it was a reference to the old table-top polygon game, but was disappoint!! I'll watch anyway, since OP goes great work.
Hehe thanks mate

Quote:
Originally Posted by Chrazey View Post
New build one, nice!

Although I gotta say that it looks to be basically nothing new with every new release of these "Master" cases lol.
Thanks mate

I see it as Cooler Master continuing to improve on the case. It also makes it easier for people that purchased the initial model to upgrade things that have come out since, like the tempered glass side panels for example
Reply With Quote
  #6  
Old 03-04-17, 12:24 PM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Hey guys,

Progress has been slow with this one however I thought to give you guys at least some content as I'm still trying to figure out how to tackle this build

The case is fully stripped at the moment, ready to be cut into! And by the look of things, there will be a lot of cutting :P

















Stay tuned!

Cheers,

Alex
Reply With Quote
  #7  
Old 04-04-17, 02:01 PM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Things have started to come apart :P



















Stay tuned for more!

Cheers,

Alex
Reply With Quote
  #8  
Old 09-04-17, 01:30 AM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Not much real progress on the build with this update unfortunately. It's a bit hard to keep up with the 3 builds I'm working on at the moment.

Here are the new Cooler Master RGB fans.

















Stay tuned for more!

Cheers,

Alex
Reply With Quote
  #9  
Old 26-04-17, 01:58 PM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Hey guys,

Sorry for the lack of updates on this build but unfortunately that's what happens when you're working on 3 case mods at the same time and they all have to be finished at the same time. Plus I've got my full time job on top of that. Been super busy lately.

What I'm gonna do however is focus on getting this build log ready and finishing this build as it has to be done and submitted for the Cooler Master Case Mod World Series by the 3rd of May.

So here is the progress that I've made so far. The PSU has been mounted in it's new location, I have a new motherboard tray that is mounted over the existing one to maintain the case rigidity, the back panel has been completely cut out and a new panel installed that has a 240 radiator mount and the I/O is in the top.

I also have the extra 'top' exterior panel mounted on the back. There is also a cut out in the mid-tray section with a piece of acrylic mounted over it. This is for the pass-through fittings later.

You will also see an acrylic panel in the bottom and a piece on the back.

I hope that all makes sense but I'll have a video in the end explaining it all and showing more of the actual progress for those interested.

I have to give a huge shout out to Corey from Imfaceroll Gaming for the help in cutting the aluminium panels on his CNC machine. Otherwise I don't know how I would have had time to get this done for the submission date.

Also thanks to Justin from Metalicacid for the tips on how to brush my aluminium panels. I think minus some of the deeper scratches they all came out really good. Most of that will be covered anyways.

So here are the photos guys!











I forgot to mention the cut out in the front panel as well.

















Hope you guys enjoy the progress so far and stay tuned, there will be a lot more photos to come!

Cheers,

Alex
Reply With Quote
  #10  
Old 27-04-17, 04:02 PM
ciobanulx's Avatar
ciobanulx ciobanulx is offline
Advanced Member
 
Join Date: Dec 2012
Location: Sydney, Australia
Posts: 443
Hey guys,

Here's some quick pics of the motherboard going in. I know the Rampage V Extreme is a bit old now however it will match the theme perfectly

Also, huge shout out to Mwave Australia for sending over a 6850K for the build!















Time to get some water blocks on

Thanks for checking it out!

Cheers,

Alex
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump










All times are GMT. The time now is 08:17 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.