OC3D Forums

OC3D Forums (https://forum.overclock3d.net/index.php)
-   Rig Gallery (https://forum.overclock3d.net/forumdisplay.php?f=49)
-   -   Black and white Rig (https://forum.overclock3d.net/showthread.php?t=97359)

Dicehunter 02-09-21 07:09 PM

Black and white Rig
 
So I couldn't help myself, I saw the 3080 Ti HOF and had to get it for my monochromatic build, Few things to add like another 2 sticks of the same memory and possibly a white support bracket, I may swap out the
Corsair H115i Pro XT for a Corsair H115i Capellix as I really prefer the look and then use the former in my HTPC, But it's largely done :)

The card itself is 1 of the heaviest GPU's I've ever come across, Must be in the region of 3-4KG, Great performer though, Very quiet and cool, Boosts up to 1950 on the core on its own and settles around 1920 after 30 minutes of a valley run.


https://i.imgur.com/67DcLRB.jpg


https://i.imgur.com/sgr3GW2.jpg


https://i.imgur.com/IzPGFQd.jpg


Specs of system -


AMD Ryzen 5800X 8 core 16 thread

Asus ROG Crosshair VIII Hero X570

Corsair Vengeance RGB Pro 16GB 3600MHz *2x8GB*

KFA2 RTX 3080 Ti HOF - 12GB GDDR6X

Western Digital SN850 PCI-E 4.0 1TB + Heatsink

Western Digital Black 6TB x 2

Corsair H115i Pro XT + 2 x Corsair HDRGB 140mm

Corsair RMi 1000 Watt + CableMod Cable Replacement Kit

Corsair 680X Tempered Glass Black + 4 x Corsair Crystal RGB Fans 120/140mm


I had to remove the bottom and middle fan on the front of the Corsair 680X as there was simply no room, A shame really as the Corsair HDRGB fans on the front looked great, I'll have to see what type of super slim fans I can get for the front to blow a little cool air over the card.... or just get a bigger case.

https://i.imgur.com/lcLObsS.jpg


https://i.imgur.com/MiciwlD.jpg


UPDATE

This eventually turned into a red/white/black themed OC3D style rig with case changed to a 5000D Airflow and cooler swapped out for an H150i Elite Capellix.

Front HDD cavity of the 5000D sealed off with plasticard and vinyl -

https://i.imgur.com/Cf60sY2.jpg


All fan stickers removed and replaced with white vinyl -

https://i.imgur.com/zDnTVDH.jpg


Capellix pump top replaced with custom OC3D plexi top -

https://i.imgur.com/wVH8QmP.jpg




The removable plate to the right of the motherboard now has a white/red vinyl cover to try and match the orientation of the custom Cablemod 24 pin and triple 8 pin colours -

https://i.imgur.com/8NT39xn.jpg




Finished shot -


https://i.imgur.com/k4GA1tS.jpg

Warchild 02-09-21 09:34 PM

Im just going to leave this here for you Dice

https://images.squarespace-cdn.com/c...pg?format=750w

Eddie long 02-09-21 09:39 PM

umm shiny and white ,, Dice you have no will power lol
but its a nice card and it looks good in the rig :)

Dicehunter 02-09-21 09:42 PM

Quote:

Originally Posted by Warchild (Post 1035699)
Im just going to leave this here for you Dice

https://images.squarespace-cdn.com/c...pg?format=750w


ROFL XD


Quote:

Originally Posted by Eddie long (Post 1035700)
umm shiny and white ,, Dice you have no will power lol
but its a nice card and it looks good in the rig :)


Shiny always wins ^_^

Warchild 02-09-21 09:47 PM

Quote:

Originally Posted by Eddie long (Post 1035700)
umm shiny and white ,, Dice you have no will power lol
but its a nice card and it looks good in the rig :)

Funny you say that because the die above was a joke i mentioned to Dice recently about rolling a die for willpower.

Bartacus 02-09-21 10:10 PM

I'd roll crappy on willpower too, LOL! I've been buying ridiculous amounts of stuff for my two 3d printers recently. Especially my new Ender 3 V2, which is such a total LEMON that instead of returning it, I chose to modify the problems away. I've lost count of how much crap I've ordered in the past 2 weeks.

Dicehunter 03-09-21 10:22 PM

The lack of airflow over the card from the front of the case, Due to 2 x fans missing, Was annoying me so I ordered the Corsair 4000D Airflow, Nice and clean looks, The 680X looks nice but the airflow in the front isn't that good even with fans fitted due to a solid piece of glass infront of the fans so this should help a nice amount, Sold the 680X and had more than enough to cover the 4000D.

Will post pics when I've swapped everything over.

EDIT

Scratch that, Apparently a 280mm AIO with non low profile memory will not fit in the top of the case so going to have to see what else I can get as I don't want to front mount the AIO as I simply don't like the look.
https://www.overclockers.co.uk/media...23_750x750.jpg

Warchild 04-09-21 07:34 AM

Dice. I would go back to the 540 Cube. It was designed for air flow. Has plenty of space and a back compartment as you know.

Perfect for you.

Dicehunter 04-09-21 10:20 AM

Quote:

Originally Posted by Warchild (Post 1035717)
Dice. I would go back to the 540 Cube. It was designed for air flow. Has plenty of space and a back compartment as you know.

Perfect for you.


I was actually thinking about this, It is my most favourite case to date, Now to find a white one that isn't stupidly marked up ^_^

Warchild 04-09-21 01:16 PM

Quote:

Originally Posted by Dicehunter (Post 1035719)
I was actually thinking about this, It is my most favourite case to date, Now to find a white one that isn't stupidly marked up ^_^

I actually have one in storage :D


All times are GMT. The time now is 08:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.