OC3D Forums

OC3D Forums (https://forum.overclock3d.net/index.php)
-   Project Logs (https://forum.overclock3d.net/forumdisplay.php?f=39)
-   -   PROJECT ISOLATION (modded Cooler Master MasterCase 5 Maker) (https://forum.overclock3d.net/showthread.php?t=75645)

ciobanulx 27-04-16 12:58 PM

PROJECT ISOLATION (modded Cooler Master MasterCase 5 Maker)
 
http://i.imgur.com/64MqulY.jpg

Hi guys,

Been a while since I've been active on the forums :)

I've been super busy with a new job, move to a different city and pretty much a whole new life!

Glad to say that I'm back and with a very exciting project!

As the banner suggests it will be based on the Dead Space games and it's my entry for this year's Cooler Master Case Mod World Series as well as the ANZ Edition of the "World Series".

I am going all out with for this project and trying some modding techniques I haven't done before so stay tuned and enjoy the build log! I'm gonna give a little hint and say that this will NOT be a clean build :)

I would like to say a huge thanks to Cooler Master Australia for giving me this opportunity as well as ASUS Australia, Kingston HyperX, Avexir, Bitspower, Primochill, CableMod, PLE Computers and a new addition from a friend of mine, Kristian from MercoMods!

SPECS

Case - Cooler Master MasterCase 5 Maker
Motherboard - ASUS Maximus VIII Extreme Assembly
CPU - Intel i7 6700K
Memory - 4 x 4GB Avexir ROG Certified Red Tesla 2400Mhz DDR4
GPU - 2 x ASUS STRIX GTX 980
SSD - 2 x Kingston HyperX Fury 240GB SSDs
PSU - Cooler Master V1000

Cables - CableMod Fully Custom Individually Sleeved Cables + MercoMods Custom Braided Extensions
LEDs - CableMod Magnetic RGB LED Strip

Radiators - Bitspower Leviathan Slim 240 Radiator, Bitspower Leviathan Xtreme 360 Radiator
Fans - CoolerMaster JetFlo 120mm Red and White LED fans
Pump - Laing D5 with Black Bitspower MOD Package - Pump Top + Casing
Reservoir - Bitspower D5 Top Upgrade Kit 150 with Cascade Tube Effect
Fittings - PrimoChill Revolver SX Matte Black + Various Bitspower Carbon Black angle fittings and extensions
Tubing - PrimoChill Copper Tubing
CPU Block - Bitspower Summit EF
GPU Block - 2 x Bitspower VG-NGTX980ADIIS

For now I'll start with the packages received from Cooler Master

A mysterious box (though the thread title might hint at what's inside)

http://i.imgur.com/0b7m50G.jpg

JetFlo fans and a V1000 power supply

http://i.imgur.com/vMK3QFQ.jpg

Stay tuned for more guys!

Cheers,

Alex

ciobanulx 01-05-16 01:23 PM

http://i.imgur.com/64MqulY.jpg

Hi guys,

Here's a look at the glorious CoolerMaster Master Case 5 Maker! A good improvement from the 5 Pro :)

http://i.imgur.com/WM8b80X.jpg

http://i.imgur.com/UIJb8rN.jpg

http://i.imgur.com/klP74pk.jpg

New integrated fan controller and LED controller with one red LED bar included.

http://i.imgur.com/X3V4t6r.jpg

The front section is easily removable with clips at the bottom and magnets at the top, revealing the front intake mesh and 5.25" bays. The front panel is also padded with sound dampening material.

http://i.imgur.com/NfSpiZE.jpg

http://i.imgur.com/GeFDA6M.jpg

Sound dampening cover for the top as well with air still being able to be exhausted through the back or front sections of the top panel.

http://i.imgur.com/MY0oAaS.jpg

http://i.imgur.com/CkWrQfv.jpg

http://i.imgur.com/24XXhBW.jpg

http://i.imgur.com/2v9eryS.jpg

http://i.imgur.com/lHaxIWl.jpg

http://i.imgur.com/6Y8TrDO.jpg

http://i.imgur.com/BqTlcpV.jpg

http://i.imgur.com/fEk2KQ4.jpg

http://i.imgur.com/pT8cW1x.jpg

The top sound dampening cover can be removed, with clips towards the front and magnets in the back.

http://i.imgur.com/RFjTwfj.jpg

The top slide on cover now has integrated magnets as well, towards the front for a better grip.

http://i.imgur.com/ga9QLhb.jpg

http://i.imgur.com/GQlyQUt.jpg

http://i.imgur.com/mNn5kCf.jpg

http://i.imgur.com/0b589Cw.jpg

http://i.imgur.com/DnDTgAt.jpg

http://i.imgur.com/vfHj13B.jpg

http://i.imgur.com/iyOXB9D.jpg

http://i.imgur.com/oSSSO4W.jpg

http://i.imgur.com/uLZJyrR.jpg

The included magnet LED bar. This one is red and not sure if case will come included with different colours.

http://i.imgur.com/1ooyoik.jpg

Thanks for checking it out and stay tuned for more guys!

Cheers,

Alex

Dawelio 02-05-16 11:06 AM

Ohh boy, another build log. Nice! :)

I'm subbed! :)

WYP 02-05-16 11:19 AM

subbed, I look forward to seeing what you can do with the case.

ciobanulx 02-05-16 11:51 AM

Quote:

Originally Posted by Chrazey (Post 902203)
Ohh boy, another build log. Nice! :)

I'm subbed! :)

Quote:

Originally Posted by WYP (Post 902206)
subbed, I look forward to seeing what you can do with the case.

Thanks a lot guys :D

ciobanulx 02-05-16 12:06 PM

http://i.imgur.com/64MqulY.jpg

Hi guys,

I'm prepping the case for painting but doing some mods first :)

Ignore the smaller scratches, I was just trying something. The paint will cover all that and might even stick better now :P

The large scratch looking cuts were done with the dremel! The melted plastic is exactly the effect I wanted. Once it's all painted you will see :D

http://i.imgur.com/MUL94ia.jpg

http://i.imgur.com/gr2xIwh.jpg

http://i.imgur.com/Hmwnd14.jpg

http://i.imgur.com/Fr1r8pt.jpg

http://i.imgur.com/y4KGGVL.jpg

http://i.imgur.com/8wGFFsM.jpg

http://i.imgur.com/gClALGO.jpg

http://i.imgur.com/9Kbi39k.jpg

http://i.imgur.com/fNskWu3.jpg

http://i.imgur.com/UdGnFfB.jpg

Let me know what you guys think so far and stay tuned for more!

Cheers,

Alex

ciobanulx 05-05-16 11:40 AM

http://i.imgur.com/64MqulY.jpg

Hi guys,

I have another update for you!

This time showcasing the Cooler Master V1000 power supply as well as the JetFlo fans!

The fans are red and white LED, I got more than I needed as I'm not sure how I'm gonna combine the colours in the build.

Also, the banner has been update with PLE Computers joining as a sponsor! PLE Computers is one of the best online computer store in Australia with lots of variety for water cooling on top of all the normal components. They even stock Linus' special edition Noctua fans as well as the LTT hoodies. If you're an aussie, check them out if you haven't already :D https://www.ple.com.au/

http://i.imgur.com/oxpAsO0.jpg

http://i.imgur.com/eBIYY8S.jpg

http://i.imgur.com/pxMlQ8w.jpg

http://i.imgur.com/Ulop8s7.jpg

http://i.imgur.com/zkEB4ns.jpg

http://i.imgur.com/ZxxNuox.jpg

Some pretty powerful fans but they also come with voltage reducers for lower RPM and noise :D

http://i.imgur.com/Nk0dENM.jpg

http://i.imgur.com/eL2ZgQw.jpg

http://i.imgur.com/K61FWDp.jpg

As we as proprietary screws for the anti-vibration soft corners on the fans which are removable.

http://i.imgur.com/sOQiBz3.jpg

With these fans the LEDs are in the middle with the light shining towards the edges creating a nice effect.

http://i.imgur.com/33PJ4d5.jpg

http://i.imgur.com/7BRAQN5.jpg

http://i.imgur.com/HZtX4mP.jpg

All black and sleeved cable

http://i.imgur.com/DXEUFwW.jpg

http://i.imgur.com/THVUKlM.jpg

http://i.imgur.com/GILHlus.jpg

http://i.imgur.com/wWTqfRF.jpg

http://i.imgur.com/xhMuGhU.jpg

http://i.imgur.com/vWv1oZf.jpg

http://i.imgur.com/ORAFMvr.jpg

http://i.imgur.com/6aSKme4.jpg

http://i.imgur.com/xVKSydd.jpg

http://i.imgur.com/JAxuqx1.jpg

http://i.imgur.com/bmI0l3x.jpg

Thanks for checking it out guys and stay tuned for more!

Cheers,

Alex

ciobanulx 08-05-16 02:29 PM

http://i.imgur.com/64MqulY.jpg

Hi guys,

I've got an exciting update for you today :D

Since this is a Dead Space theme I'm looking at a different painting technique for the entire case!

So I'm testing out this rust paint to see if it's the effect I'd like to go for in this build as well as learning how to apply it. Luckily I have quite a few spare case panels laying around.

The idea with this is that it can be applied to anything, even plastic and rust that too. It's a metal based paint which you apply with a brush and leave it to dry for about 1 hour. Once dry you apply the oxidising patina which is a form of activator that speeds up the rusting process. Leave it for a few good hours and you should have a nice, real rust effect.

So tonight I've applied it to a spare case panel. I did a few different areas where I applied it on straight as well as in a random pattern to see if it gives a different effect or if it even matters how you apply it. I've then applied the activator and leaving it overnight. I've also applied the activator to a part of the panel with no metal base paint as technically this should rust metal by itself too, however it might not go through the powder coating on the panel.

This is the stuff and how it looks after about 30 min since the activator was applied. I'll show you guys the effect tomorrow once it fully dries.

http://i.imgur.com/RuBmV9B.jpg

http://i.imgur.com/nkWxJBl.jpg

http://i.imgur.com/xPyF4Zu.jpg

http://i.imgur.com/0BT1TOj.jpg

http://i.imgur.com/18DFdgA.jpg

http://i.imgur.com/Kn36AYK.jpg

This is the rust base applied.

http://i.imgur.com/wHYPzYD.jpg

http://i.imgur.com/SNHbDvS.jpg

This is once dried.

http://i.imgur.com/xy1Jvp9.jpg

http://i.imgur.com/vSnU9XT.jpg

And this is the Oxidising Patina applied.

http://i.imgur.com/OqDDO0Y.jpg

http://i.imgur.com/a2tZr6X.jpg

http://i.imgur.com/KD5OKtO.jpg

Applied some more as the more you have on and the longer it stays wet for, the more intense the effect will be.

http://i.imgur.com/f1oIzbZ.jpg

You can already see it starting to rust here.

http://i.imgur.com/SYVGAJA.jpg

http://i.imgur.com/5dbU4t8.jpg

http://i.imgur.com/2kqZ8zX.jpg

This is after about 30 mins with the activator applied.

http://i.imgur.com/J2cXqb1.jpg

http://i.imgur.com/ocsJkL3.jpg

http://i.imgur.com/RlZuX8t.jpg

http://i.imgur.com/BAmIqlO.jpg

We'll see the full effect tomorrow once it dries.

Hope you guys have enjoyed this update! I'm definitely really excited for this entire project!

Thanks for checking it out.

Cheers,

Alex

Buddy3012 08-05-16 05:00 PM

What a dirty job^^

ciobanulx 09-05-16 07:26 AM

Quote:

Originally Posted by Buddy3012 (Post 903098)
What a dirty job^^

Yea that's how it's meant to be :P


All times are GMT. The time now is 01:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.