XSPC Starter kits

[mnc fear]

Looking at both the Starter Kits for my Machines

was going to get both the 750 Kits with the Delta and the Other with the Rasa for my better machine

The first kit would be my maiden run so any Mistakes would be good to happen there

I watched Toms Videos and they were good- also been looking through the Net at other videos on Watercooling

Only thing is- I have a Lancool K62 and will shortly have another and the only Radiators which fit seem to be the Black Ice Stealth after a bit of modding so I would be left to see the 2 rads XSPC 240GS that come with the Kits

I would also through time like to add a GFX card to the loops so Upgrading the Kit with another 120 Rad on the Back was my line of thinking

Anyone advise on this?

Thanks for looking guys

 

[ChrisGT]

The XSPC RS240 rads are thin dude. There is no GS... You shouldn't have a problem mounting. What cpu's are you running?

Measure how much room you have from the top of the motherboard to the top of the case.

Btw what card were you thinking because a 120 is a joke for any mainstream, I would never run gpu and cpu in the same loop without a thick 360 rad like the rx360.

The kits themselves are great starter kits. They come with everything you need to do 1 loop.

http://www.youtube.com/watch?v=SVMQcE3w5co

 

[mnc fear]

Yeh sorry mate I would have been clearer

I was going to have a 240 on top and another 120 RAD on the back of the case

From what I understand Ill need a Black Ice Stealth to fir betwwen the lyers on the top of the case

I was a bit worried about the Pump/Res but notice you can upgare it easily enough

the GS was a Typo should have read RS

I really am itching to start Watercooling

 

[ChrisGT]

Measure how much space you have in there and I can tell you if the rs240 will fit. The black ice is a joke its pointless you might as well air cool. I hate to be blunt but your not going to see great results with that thin of a rad.

Which cpu's are you cooling which gpu do you plan to cool. Think ahead dude neither of the rads you are saying would do anything for any of the mainstream graphics cards out there.

 

[Stryker64]

You could look at fitting a nice thick radiator at the front of the case as well. Use up the bottom 3 5.25" bays, get a 120mm mount for drive bays and bolt on a nice thick radiator.

 

[tinytomlogan]

It depends on the GPU but adding another 120mm rad wont be enough tbh dude as the rads that coming in the kits are beginner rads. If you want to add a GPU then you really need to buy the parts seperately and get it top notch first time.

With water its all or nothing.