I'm going to watercool my current rig in the near future.
Probably gonna buy the components during this month.
My current rig:
Nzxt switch 810
Asus Maximus IV Extreme
Xfx hd 6990 (2x Msi GTX660ti power edition OC on coming in)
i5 3570k
Thermalright Macho
Corsair Gs800 800w psu
seagate 2tb hdd
samsung 830 128gb ssd
16gb kingston hyper-X 1866mhz
Here's my current plan:
Tank: EK-D5 X-RES 140 CSQ - Acetal
Pump: Laing D5 Strong (8-24V DC Pump)
Pump mount: EK-UNI Holder D5
Cpu Block:EK-Supremacy
Vga blocks: EK-VGA Supremacy
Vga bridge: EK-FC Bridge TRIPLE Parallel CSQ Plexi and EK-FC Link BLANK Parallel CSQ
Radiator: Alphacool NexXxoS Monsta 420
Fans: 6x NF-A14-FLX in push&pull
Fan controller: Fractal Design Adjust 108
Fittings: 16/13mm black nickel compression fittings
Tube: Tygoon R603 Clear tube
Coolant: EK-Ekoolant Blood RED (premix 1000mL)
Is there enough cooling power on this radiator for 3570k and 2x 660ti? I'm going to probably upgrade to LGA2011 when Ivy Bridge-E comes out, and probably also go 3-way SLI, That's why the Triple Vga bridge. I'm probably also going to need a second radiator for those? Anything else, feel free to comment. Also my first post, long time lurker here.
Edit: Should I get a longer/bigger reservoir for water? The case could definitely fit a longer one.
Probably gonna buy the components during this month.
My current rig:
Nzxt switch 810
Asus Maximus IV Extreme
Xfx hd 6990 (2x Msi GTX660ti power edition OC on coming in)
i5 3570k
Thermalright Macho
Corsair Gs800 800w psu
seagate 2tb hdd
samsung 830 128gb ssd
16gb kingston hyper-X 1866mhz
Here's my current plan:
Tank: EK-D5 X-RES 140 CSQ - Acetal
Pump: Laing D5 Strong (8-24V DC Pump)
Pump mount: EK-UNI Holder D5
Cpu Block:EK-Supremacy
Vga blocks: EK-VGA Supremacy
Vga bridge: EK-FC Bridge TRIPLE Parallel CSQ Plexi and EK-FC Link BLANK Parallel CSQ
Radiator: Alphacool NexXxoS Monsta 420
Fans: 6x NF-A14-FLX in push&pull
Fan controller: Fractal Design Adjust 108
Fittings: 16/13mm black nickel compression fittings
Tube: Tygoon R603 Clear tube
Coolant: EK-Ekoolant Blood RED (premix 1000mL)
Is there enough cooling power on this radiator for 3570k and 2x 660ti? I'm going to probably upgrade to LGA2011 when Ivy Bridge-E comes out, and probably also go 3-way SLI, That's why the Triple Vga bridge. I'm probably also going to need a second radiator for those? Anything else, feel free to comment. Also my first post, long time lurker here.
Edit: Should I get a longer/bigger reservoir for water? The case could definitely fit a longer one.
Last edited:
