Waterblock for 7200GS?

[Azza]

Will a MAZE4 fit or is there anything else out there?

 

[[O-CuK]Marci]

Pot luck on the lowend cards - they tend to stray from the reference design a bit more than the larger cards... eg: ATI X600Pro - Maze4 fits, but only if you dremel out a few chunks from the top and baseplate that hit some rather large capacitors on the cards surface. Manufacturers tend not to test blocks on all these low-end cards either, so they rarely have a concrete list...

Going off the pic below, it SHOULD fit... but in all honesty, you may as well save your loop from it's heatdump and whack a passive heatpipe cooler on it...

 

[Azza]

Ended up getting a XFX card which has a passive cooler on it and ive wacked two 120mm yate loons right next to it.

and ATi tool is reporting 27C idle in windows and no more than 35C loaded using the articfact scanner in ATI tool (not the best thing for loading but I dought it gets any higher in 3D apps). Card running at 675/800 stock clocks are 450/532. Those are the max clocks that Rivatuner will do for the card.

 

[maverik-sg1]

You can set the clock parameters in Rivatuner power user settings to enable high if required.

Cheers

Mav

 

[Azza]

You can set the clock parameters in Rivatuner power user settings to enable high if required.

Cheers

Mav

How do I do that then Mav?

Thanks