Vaping

[Tolemac]

I got the prince with the 5ml glass, didn't fancy the curved glass because if it tips the glass will be what hits first, coincidence was looking at getting the RBA for it today but my local shop doesn't have it in

I got mine from here http://www.cabinmods.com/home/280-smok-tfv12-prince-coils-rba-single.html

This place has excellent customer service for a very small business . Really friendly and helpful

EDIT: My second attempt came out better I will be using these

Looks good! Are you going to be vaping it at 3mg?

Yes Lucy in time I intend to make my own juice to make it cost effective. The idea is to save money but that won't happen I have 2 extra Taxes "Daughter Tax and Mrs tax LOL"

 

[Tolemac]

I had little sleep last night damn insomnia i'm sure it's the nicotine withdrawal. so I experimented with the wire I had and made these Twisted 3 ply, Twisted 2 ply, Spaced and Contact coils

I want to learn braiding next but need a blow torch :ar:

https://www.youtube.com/watch?v=pcvPR9nr_jg&t=21s

 

[Tolemac]

It has arrived and with 60ml of free juice as well as the Highland Mist i'm charging the batteries atm so won't get to use it just yet. As I said in the Maplin thread this is why I support small businesses. I have had nothing but superb advice plus a freebie from them now thats good customer relations and it's not a paltry pack of Haribo either .

 

[Layer Cakes]

It has arrived and with 60ml of free juice as well as the Highland Mist i'm charging the batteries atm so won't get to use it just yet. As I said in the Maplin thread this is why I support small businesses. I have had nothing but superb advice plus a freebie from them now thats good customer relations and it's not a paltry pack of Haribo either .

Looking good! These mods perform really well. Just make sure you're using decent high grade cells and you should be good to go!

Are you going to use the coils pre installed in the RBA first?

Edit, noticed vtc6. Best choice for a regulated mod imo

 

[Tolemac]

Looking good! These mods perform really well. Just make sure you're using decent high grade cells and you should be good to go!

Are you going to use the coils pre installed in the RBA first?

Edit, noticed vtc6. Best choice for a regulated mod imo

I know about electrickery . Using the T10 coil atm it blew me bloody head off at first but used to it now at 90 watts one thing I did notice about these coils is you have to cut the coil wire where the rubber seal is otherwise the tank will leak

 

[Layer Cakes]

I know about electrickery . Using the T10 coil atm it blew me bloody head off at first but used to it now at 90 watts one thing I did notice about these coils is you have to cut the coil wire where the rubber seal is otherwise the tank will leak

If that's the case, I'm sure you'll be messing about with pwms and what not before long!

I've seen that on smok coils before. They trap it between the gasket to make sure it's making a proper contact with the positive pin at the bottom. They usually over do it though.

 

[Tolemac]

If that's the case, I'm sure you'll be messing about with pwms and what not before long!

I've seen that on smok coils before. They trap it between the gasket to make sure it's making a proper contact with the positive pin at the bottom. They usually over do it though.

Yeah it seems to be an issues with them Gonna name my mod "New Vapey"

and here is "Old Vapey"

I stil regret selling even though I did not need it anymore. It was such a good 290X

and been chatting to the guy who is experimenting with these I am in my element atm "pun intended" LOL

 

[Layer Cakes]

Yeah it seems to be an issues with them Gonna name my mod "New Vapey"

and here is "Old Vapey"

I stil regret selling even though I did not need such a good 290X

Haha :lol:

Glad your enjoying it! Keep us updated how it goes with the rba

 

[Tolemac]

RBA Build

I had some free time today so I thought I would build and test this RBA

WARNING BUILDING COILS ON ANY DECK CAN BE DANGEROUS IF YOU DO NOT KNOW WHAT YOU ARE DOING SEEK EXPERT ADVICE BEFORE DOING THIS

The tools I used apart from the soldering iron ofc

Then I installed 2 ply Stainless steel coils in the deck

Comparison to the T10 pre-built coil

Then I installed the wicks

I primed the coils and wicks with juice put the tank on and filled with Juice

It produces a nice vapour but by no means perfect so i'm going to get more advice from the FB group I am in

Nice Vape not too harsh at 50 watts .
As I said before please do a lot of research before doing this. I spent about a week researching videos and getting advice. I am by no means an expert to this but I understand electricity .

Here is the guide for my specific RBA.
https://www.youtube.com/watch?v=egr3m2-VCZM&t=449s

A useful video about ohm's law and safe vaping
https://www.youtube.com/watch?v=O3h0ta-L_zc

A useful site is steam engine which is a calculator to find out the resistance of the coils you have made
http://www.steam-engine.org/wirewiz.html

 

[creme_]

I've never tried it. Isn't it bad for your health?

 

[AlienALX]

I've never tried it. Isn't it bad for your health?

Probably, but nowhere near as bad as cigs. If you've never done it never do it, Nicotine is a sod.

 

[NickOmega]

My latest additions.

New mod: Wotofo Chieftain 80W, for the bargain price of £24.99. Comes with a sleeve for using 18650 batteries but gonna grab some 26650s for the extra capacity.

Also getting fed up of mixing from individual flavours (have about 200 different concentrates) so grabbed a Darkstar "Bottle Shot" (just add VG and Nicotine) for £12.99 for the 250ml bottle.

 

[Tolemac]

My latest additions.
New mod: Wotofo Chieftain 80W, for the bargain price of £24.99. Comes with a sleeve for using 18650 batteries but gonna grab some 26650s for the extra capacity.

Also getting fed up of mixing from individual flavours (have about 200 different concentrates) so grabbed a Darkstar "Bottle Shot" (just add VG and Nicotine) for £12.99 for the 250ml bottle.

Nice I have some custom juice coming from The juice cabin Hazelnut yogurt with banana and peach http://www.juicecabin.com/short-fills-120ml-size/644-custom-juice-120ml.html

and some MooNana http://www.juicecabin.com/mooman-sh...120ml/2298-nicotine_level-none_leave_it_short

 

[RobM]

I just did a rewick of my smok coil and it was a success so thats gonna save me loads as new the cost upwards of £13 for 5.
Amazed at how long the 2 coils have lasted tbh as I have been using them since the end of summer so 7 months is impressive

 

[Damien c]

Finally managed to get round to buying a Drop RDA and holy crap is it good.

Bought some twisted flat wire as well at the same time, did 2 coils 3.5mm x 6 wraps came out at .2ohm and running them at 90w and the flavour and clouds are insane.

I like this so much that my tank's have been shelved and this Drop RDA is going to be what I use unless, I am on a long drive somewhere.

Tried some different juices in it this morning, and I am actually able to pick up different flavours in the juices now, like the Tutti Fruity one before just tasted bland and I had an allergic reaction, tried it this morning and I picked up the Banana flavour which is what I had a allergic reaction to.

Tried a skittles flavour and again I pick up some individual flavours, so I have ordered some different juices this morning to try some different flavours.

I know people use to tell me that a dripper is the best way to get the full flavour but I never believed them, as the Tsunami RDA I had before didn't change the flavours but this Drop RDA is immense and it holds so much cotton and juice, I can get up to 20 or more hits of it before having to drip again.

 

[AlienALX]

I see your point. The other day I got a Tesla Invader III which uses two 18650. I have .9 ohm coils and I have gone through 30ml of juice like it's nothing. The taste is just orgasmic, especially with something like Choco Donuts.

I need to work on using it less now.

 

[Damien c]

.9 ohm??

Wow I don't think I could go back to coils above .3 ohm now, I know the juice would last longer and so would the battery life.

Currently spending around £40 to £60 per month on juice, but that is because I am still on normal cig's when I am at home, just have not got round to fully quitting the normal cig's yet but once I find a flavour that I really like and can use all the time and with this dripper, I think that will happen soon.

 

[Tolemac]

I have heard good reports on the drop . I am looking at the Advken Manta RTA myself atm and got some Stainless steel clapton wire. I use a site called the Juice Cabin for my liquid. Currently Vaping Sherbet Ice at 90W in my smok TFV 12 Prince tank with a T10 coil in it. This Juice tastes like pink sherbet pips with a cool "not Menthol" icy blast after

http://www.juicecabin.com/

 

[NickOmega]

I'm currently waiting on slow deliveries from China; I've got 2 more tanks on the way from Gearbest.

Serpent SMM for direct lung inhale

and Kayfun Prime clone for MtL

(but one without the engravings)

 

[Tolemac]

My latest additions.

New mod: Wotofo Chieftain 80W, for the bargain price of £24.99. Comes with a sleeve for using 18650 batteries but gonna grab some 26650s for the extra capacity.

Also getting fed up of mixing from individual flavours (have about 200 different concentrates) so grabbed a Darkstar "Bottle Shot" (just add VG and Nicotine) for £12.99 for the 250ml bottle.

I just got the Atomic bundle from their cosmix range myself from Darkstar i'm well impressed for £35 with 8 nic shots 500ml juice and only a 2 day steep time i'm going to get the cosmix Blueshift and Kanzi bottle shots tomorrow I have a 33% code for Blueshift plus some more base liquid using bottle shots is so easy.

https://www.youtube.com/watch?v=a67sALbH3K8&feature=youtu.be