The Official Intel Core 2 Duo Conroe Overclocking Thread

F

FarFarAway

New member
Post your Conroe clocks here.

Make sure you include whether it was stable or not (with evidence - Prime95, Super PI 32m, F@H ect) and a validation link.

Suicide shot

Stable

Stable with evidence

C2D E6400

DavidT:

Conroe E6400: 3.5GHz (437.5 x 8) @ 1.45vcore, 1.4v FSB, eVga 680i SLI, Arctic Cooler 7 Pro

Conroe E6600

Kempez:

Conroe E600 Retail: 3.6GHz (400 x 9) @ 1.65vcore, 1.6vmch , 1.4v FSB Asus P5W DH Apogee/Evo 360/D5

Conroe E6600 Retail: 3.375GHz (375 x 9) @ 1.55vcore, 1.4v FSB, 1.6vmch DFI ICFX3200 Apogee/Evo 360/D5

Conroe E6700 ES: 3.7GHz (370 x 10) @ 1.475vcore, 1.4v FSB, 1.6vmch Asus P5W DH Apogee/Evo 360/D5

Conroe E6700 ES: 3.9GHz (390 x 10) @ 1.65vcore, 1.4v FSB, 1.6vmch Asus P5W DH Apogee GT/Evo 360/D5

Xeon 3070 Retail: 4GHz (400 x 10) @ 1.585vcore (BIOS), 1.27vmch , 1.9v FSB Abit IP35 Pro Apogee GT/Evo 360/D5

Doddsy:

Conroe E6600:3.4Ghz (378x9) @ 1.475vcore, 1.4vmch, 1.4 CPUvtt, Abit QuadGT

Devious:

Conroe E6600 ES: 4.129GHz (459 x 9) @ 1.55vcore, ?vmch , ?v FSB

Conroe E6600 ES: 3.942GHz (438 x 10) @ 1.55vcore, ?v FSB, ?vmch

Conroe E6700 ES: 3.7GHz (375 x 10) @ 1.55vcore, ?v FSB, ?vmch

FragTek:

Allendale E6300 Retail: 3.1GHz (443 x 7) @ 1.375vcore, 1.45v FSB, 1.7vmch, Abit AB9

Scythe Infinity

Conroe E6600 Retail: 3.7GHz (412 x 9) @ 1.55vcore, 1.85vmch, Abit AW9D-MAX

Scythe Infinity

Conroe E6600 Retail: 4.0Ghz (445 x 9) @ 1.6vcore, 1.72v NB, DFI ICFX3200

Vapochill LS

Conroe E6600 Retail: 4.4Ghz (490 x 9) @ 1.7vcore, 1.79v NB, DFI ICFX3200

Vapochill LS

Conroe 3070 Retail: 3.2Ghz (320 x 10) @ 1.2vcore, 1.5v MCH, Intel D975XBX2

Zalman CNPS 9700 NT

Kougar:

Allendale E6300 Retail: 3.5GHz (501 x 7) @ 1.47vcore, unknown VMCH

PhillyX1900

Conroe E6300 Retail: 3.5GHz (445 x 7) @ ???vcore, unknown VMCH

GrimReaper:

Conroe E600 Retail: 3.12GHz (390 x 8) @ 1.296vcore, ???vmch , ???v FSB

Conroe E600 Retail: 3.51GHz (390 x 9) @ 1.472vcore, 1.45vmch , 1.4v FSB
 
I'll go first

Max Stable OC 3.6GHz (400 x 9)



http://valid.x86-secret.com/show_oc?id=111144



What I may run it t 24/7 is 3.375GHz (375 x 9)



image.php


http://valid.x86-secret.com/show_oc?id=111180

Not bad
 
Here goes...

Cpu : E6600

Stepping: 5

Revision: B1

CPU Volts: 1.55

Cooling Method: Water

Heat Sink: Swiftech Apex - Apogee block

Motherboard: Asus P5W DH Deluxe

Bios: 0903

Ram Brand: Team Xtreme

Ram Speed: 5300

Ram Latency: 4-4-4-8

Suicide shot 4129 Mhz, limit of mobo not cpu.

http://valid.x86-secret.com/show_oc?id=111061



Also, Duel Prime stable @ 3.942 Ghz

As above but

Bios 0801

Ram Mhz: 657

 
Nice clocks Devious, must have missed it when those were originally posted.

@Kemp: Slowly but surely getting it up there. Any chance of taking it over 3ghz?
 
Devious said:
I just got a E6700 to try out.



3.7 Ghz with 1.55v in bios duel prime stable.
Click to expand...

Not too bad. I've found that the E6600 and higher need a fair amount of colts to be stable at higher than 3300MHz :(
 
This E6700 was prime stable on stock volts at 3300 Mhz but after that it didnt scale too well and wouldnt even boot at 3400Mhz with stock volts.

My E6600 was duel prime stable at 3400 Mhz on stock and scales very well too.
 
Intel Core 2 Duo E6300 - Dual Prime Stable

Clock Speed: 3,100mhz

FSB: 443mhz x 7

Mem. Timings: 5-5-5-15

CPU Voltage: 1.375v

Mem. Voltage: 2.5v

Load Temp: 46*c

Cooling: Scythe Infinity

SuperPi 1mb: 18.233 Seconds
 
Kempez said:
Nice Fragster :ar:

Is this stable? Got some stability shots?
Click to expand...

I didn't snap any prime screens last night, but this is the best I can do for ya right now.... 7+ hour dual F@H stable.

get.php
 
You must log in or register to reply here.

Similar threads

FragTek
  • Locked
[hwbot] Super Pi 1M
2 3
Replies
48
Views
16K
badatgames18
B
Back
Top