The Official AMD Overclock Thread

[dhicks001]

AM2+ 940 Black 3.0 stock @ 3.6 GHz O/C

1.408v

CM Hyper 212+ cooler

Corsair XMS2 2x2GB 800MHz 5-5-5-18

3.8 gig is do able @ 1.45-475, but it'll do. For now...

 

[dhicks001]

So today I managed to hit 4 Ghz.

Take a look.

http://forum.overclock3d.net/index....ua-nh-d14/page__st__20__p__387079#entry387079

 

[KTCRITCH]

I somehow got my Athlon X2 250 rated at 5.85Ghz. And she runs quite cool.

 

[michaelah500]

1090T 3.2GHz O/C 4.01GHz

1.5v

Idle Low: 32 degrees

Idle High: 39 degrees

Load Low: 47 degrees

Load High: 69 degrees (bad I know...but that's on the highest prime95 and intel burn test settings, gaming for hours and I only hit around 45 degrees).

Overall not a bad clock. But I would like to go higher.

 

[INMATE183]

AMD 955 1.5v stable at 3.9MHz 19.5 x 200(3,926.1, variations max of 10 mostly 0.1

)

CPU NB 2200MHz

NB voltage 1.2v

HT Link freq. 2200MHz

HT 'normal' = 1.2v

Temps 40 Idle, 60 High ona ninja3 1 Fan(soon to be 2 for push and pull)

 

[dhicks001]

I somehow got my Athlon X2 250 rated at 5.85Ghz. And she runs quite cool.

NICE!!!

 

[KTCRITCH]

NICE!!!

Indeed!

 

[yuyo12]

Unfortunately dimms got wet and the board refuses to do much in single channel. Going to come back to this.

At least it takes the high voltage which is a plus for next time

this is huge overclocking! nice men!!

 

[sdms1010]

Hi

First real go at overclock, so very happy.

AMD Phenom IIx6 1090 @ 4003.5MHz

Volts Bios 1.372 Cpu-z 1.42

Asus Crosshair IV Formula

Noctua NH D14

 

[dhicks001]

View attachment 3071

Hi

First real go at overclock, so very happy.

AMD Phenom IIx6 1090 @ 4003.5MHz

Volts Bios 1.372 Cpu-z 1.42

Asus Crosshair IV Formula

Noctua NH D14

Congrats mate!! I'm disappointed by my overclock now. No way I can run it stable. I think it might be something to do with the 140w TDP. haha!

 

[dhicks001]

Got my new TRUE 120 today. Going to give that a try on the 940 and see what I can get .... BUS speed O/C is really letting me down on this M/B though

 

[Publ!cEnemy]

Hi i'm new here thought i would share what i managed to get

MSI 870a Fuzion

AMD Phenom ii x4 965 BE (can do 4GHz on 1.48/1.49v, but i usually just run it at 3.5GHz as it only needs 1.28/1.29v and it's loads cooler, just as fast in games and the clock down thing still works) I did sort of cheat because it was all done with the multiplier but hey i got 4GHz out of it

All the clocks that i got were stable with 4 hours of Prime95.

Cooled with a Titan Fenrir, less bulky than the D14 cools enough for me.

 

[dhicks001]

Hi i'm new here thought i would share what i managed to get

MSI 870a Fuzion

AMD Phenom ii x4 965 BE (can do 4GHz on 1.48/1.49v, but i usually just run it at 3.5GHz as it only needs 1.28/1.29v and it's loads cooler, just as fast in games and the clock down thing still works) I did sort of cheat because it was all done with the multiplier but hey i got 4GHz out of it

All the clocks that i got were stable with 4 hours of Prime95.

Cooled with a Titan Fenrir, less bulky than the D14 cools enough for me.

Congrats

The Fenrir is a good cooler. Cheap and efficent. I use the Ultra 120. Good pieces of kit ...

 

[dhicks001]

Have been playing around with the computer recently. Have settled on this overclock running 24/7.

O/C'd using 240*16 = 3840Mhz @ 1.45v

The motherboard finally stopped messing me around and let me increase the bus speed as and when I wanted. I'm glad I'm finally doing some "proper" overclocking.

 

[dugdiamond]

Hi i'm new here thought i would share what i managed to get

MSI 870a Fuzion

AMD Phenom ii x4 965 BE (can do 4GHz on 1.48/1.49v, but i usually just run it at 3.5GHz as it only needs 1.28/1.29v and it's loads cooler, just as fast in games and the clock down thing still works) I did sort of cheat because it was all done with the multiplier but hey i got 4GHz out of it

All the clocks that i got were stable with 4 hours of Prime95.

Cooled with a Titan Fenrir, less bulky than the D14 cools enough for me.

have you got the normal OR power edition?

 

[BrandonR-NZ]

I've got my AMD Phenom II X4 955 humming along rock solid at 4GHz 1.45v, I also got it to geekbench at 4.5GHz, got it to boot at 4.6 but I didn't want to raise the voltage too much so didn't go any further.

4GHZ Overclock Prime 95 stable...

4.5GHZ overclock Geekbench results... http://browse.geekbench.ca/geekbench2/view/377271

Also got my old Phenom II X3 720 to 3.6GHZ Stable, also unlocked it stable and clocked it at 3.4GHZ

It would run geekbench at 3.7GHZ but it wasn't really that stable unlocked past 3.4

http://browse.geekbench.ca/geekbench2/view/346433

 

[the cod god]

I'm new to the site so i just thought I'd post what i got!

Phenom II x4 955 @4.5ghz on air (titan fenrir)

almost certain i can get higher with the chip but the motherboard is awful for oc'ing.

I've got a ASRock M3A770DE. Not a good oc'ing board like i said but it was decent for the price. (£45)

http://valid.canardpc.com/show_oc.php?id=1822203

 

[Publ!cEnemy]

have you got the normal OR power edition?

Sorry it took so long internet been a bit funny. I got the normal one, because at the time the Power edition wasn't in stock anywhere.

It seems quite good TBH.

 

[Thegamervision]

Hello, I'm new here so I will post what i have

Cooler: Hyper 212+

Thermal Paste: AS5

------------------

Phenom II 945 @ 3.6 C2

1.38 volts (1.4 under load)

temps= 27-35

max heat= 55

------------------

CPU-Z: http://valid.canardpc.com/show_oc.php?id=1908721

Bye!

 

[Terrorsathan]

Hey guys,

I've been a LONG time reader/viewer of TTL. I just, finally, signed up for the forums. Here's my AMD overclocked specs.

FX 8120 @ 4.2 GHZ w/ Corsair H100 w/ Noctua NFP12 fans ( I tried the Cougar PWM vortex fans but they howl like mad when mounted horizontally )

I haven't pushed my chip any further yet, but I'm sure I could. I will update here with my max OC when I do it soon.

1.325 volts

Arctic Silver 5 thermal paste

Max Temps: 58 C

Idle Temps: 30-32 C