The Official AMD Overclock Thread
- Thread starter FragTek
- Start date
754 AMD Athlon 64 3200+
Stock: 2.21Ghz
Now: 2.43Ghz
Temp: 43 Degrees
Voltage: 1.49
So far so good, checked using Ai Booster - Overclock setting in the BIOS - 10% overclocked.
Run it through Farcry several times and haven't been getting system crashes unlike before where I set the BIOS manually.
Quite proud of myself actually.
Stock: 2.21Ghz
Now: 2.43Ghz
Temp: 43 Degrees
Voltage: 1.49
So far so good, checked using Ai Booster - Overclock setting in the BIOS - 10% overclocked.
Run it through Farcry several times and haven't been getting system crashes unlike before where I set the BIOS manually.
Quite proud of myself actually.
FarFarAway
New member
Not too bad. You could deffo go more 
WC Annihilus
New member
Riff said:754 AMD Athlon 64 3200+
Stock: 2.21Ghz
Now: 2.43Ghz
Temp: 43 Degrees
Voltage: 1.49
So far so good, checked using Ai Booster - Overclock setting in the BIOS - 10% overclocked.
Run it through Farcry several times and haven't been getting system crashes unlike before where I set the BIOS manually.
Quite proud of myself actually.
Strange... Ai Booster in general has been known to suck... and BIOS supposed to be stable... You have one strange board my friend
X2 4400 (ACBWE 0517TPMW)@ 2.8GHz
http://img115.imageshack.us/img115/1909/2800ddr510bh52fl.png
Opteron 146 (CABNE 0545BPMW)@ 3.1GHz
http://img405.imageshack.us/img405/1797/31004pn.jpg
i had a winchester 3000 (CCBID 0505APAW)@ 2300MHz (in a drawer somewhere now), and another opteron 146 (CACJE 0546BPMW) at 3GHz too, but can't find any pics
http://img115.imageshack.us/img115/1909/2800ddr510bh52fl.png
Opteron 146 (CABNE 0545BPMW)@ 3.1GHz
http://img405.imageshack.us/img405/1797/31004pn.jpg
i had a winchester 3000 (CCBID 0505APAW)@ 2300MHz (in a drawer somewhere now), and another opteron 146 (CACJE 0546BPMW) at 3GHz too, but can't find any pics
macgamesrule
New member
Athlon 64 3200+ Venice 939, LBBLE 0543UPAW
Clock: 2.55GHz
FSB: 255MHz
Mem. Timings: 3-4-4-8 1T 1:1
CPU Voltage: 1.46v
Mem. Voltage 2.7v
Load Temp: 41°c
Cooling: XP-90 + Panaflo
Athlon 64 X2 4400+ 939 (89W), CCBWE 0604MPM
Clock: 2.63GHz
FSB: 239MHz
Mem timings: 3-4-4-8 1T 1:1
CPU Voltage: 1.48v
Mem. Voltage 2.7v
Load Temp: 50°C
Cooling: XP-90 + Panaflo
Clock: 2.55GHz
FSB: 255MHz
Mem. Timings: 3-4-4-8 1T 1:1
CPU Voltage: 1.46v
Mem. Voltage 2.7v
Load Temp: 41°c
Cooling: XP-90 + Panaflo
Athlon 64 X2 4400+ 939 (89W), CCBWE 0604MPM
Clock: 2.63GHz
FSB: 239MHz
Mem timings: 3-4-4-8 1T 1:1
CPU Voltage: 1.48v
Mem. Voltage 2.7v
Load Temp: 50°C
Cooling: XP-90 + Panaflo
Got my X2 3800 to get into Windows @ 3.06GHz:
http://valid.x86-secret.com/show_oc.php?id=266321
But it wasnt Orthos stable. Dropped it back to 2.8GHz for stability and temp reasons (one of my core is now 27C, dam its cold in my house).
http://valid.x86-secret.com/show_oc.php?id=266321
But it wasnt Orthos stable. Dropped it back to 2.8GHz for stability and temp reasons (one of my core is now 27C, dam its cold in my house).
DFI LANPARTY nF4 Ultra-D (04/06/06 BIOS)
AMD OPTY 175 (CCBWE 0551VPMW)
2x512MB G-Skill PC4800 + 2x512mb OCZ 4800 Platinum
X1900 XT-X@689/797, CAT 6.6 DRIVERS
2X36GB Western Digital Raptor RAID 0
LITEON 832S DVD R/W
PCP&C 1KW PSU
Mach2 GT/Chilly1 head/Desuperheater
==========
Prime95 + 3dMark2001SE:
3dMark2003:
3dMark2005:
3dMark 2006:
==========
short description:
289x11 @ 3179Mhz, Mach2 GT cooling
AMD OPTY 175 (CCBWE 0551VPMW)
2x512MB G-Skill PC4800 + 2x512mb OCZ 4800 Platinum
X1900 XT-X@689/797, CAT 6.6 DRIVERS
2X36GB Western Digital Raptor RAID 0
LITEON 832S DVD R/W
PCP&C 1KW PSU
Mach2 GT/Chilly1 head/Desuperheater
Code:
[b]Genie BIOS Settings:[/b]
[color=red]
FSB Bus Frequency............................. - 289
LDT/FSB Frequency Ratio....................... - 4
CPU/FSB Frequency Ratio....................... - 11
PCI eXpress Frequency......................... - 105MHZ
CPU VID StartUp Value......................... - STARTUP
CPU VID Control............................... - 1.35v
CPU VID Special Control....................... - 123%
LDT Voltage Control........................... - 1.3v
Chip Set Voltage Control...................... - 1.6v
DRAM Voltage Control.......................... - 2.8v[/color]
[b]DRAM Configuration Settings:[/b]
[color=red]
DRAM Frequency Set............................ - 166=RAM/FSB
Command Per Clock (CPC)....................... - Disabled
CAS Latency Control (Tcl)..................... - 2.5
RAS# to CAS# delay (Trcd)..................... - 3
Min RAS# active time (Tras)................... - 5
Row precharge time (Trp)...................... - 3
Row Cycle time (Trc).......................... - 7 Bus Clocks
Row refresh cyc time (Trfc)................... - 14 Bus Clocks
Row to Row delay (Trrd)....................... - 02 Bus Clocks
Write recovery time (Twr)..................... - 02 Bus Clocks
Write to Read delay (Twtr).................... - 01 Bus Clocks
Read to Write delay (Trwt).................... - 02 Bus Clocks
Refresh Period (Tref)......................... - 3120 Cycles
DRAM Bank Interleave.......................... - Enabled
DQS Skew Control.............................. - Auto
DQS Skew Value................................ - 0
DRAM Drive Strength........................... - 7
DRAM Data Drive Strength...................... - 4
Max Async Latency............................. - 8
DRAM Response Time............................ - fast
Read Preamble Time............................ - 5
IdleCycle Limit............................... - 16 Cycles
Dynamic Counter............................... - Enabled
R/W Queue Bypass.............................. - 16 x
Bypass Max.................................... - 07 x
32 Byte Granularity........................... - Disable(4 Bursts)
[/color]==========
Prime95 + 3dMark2001SE:
3dMark2003:
3dMark2005:
3dMark 2006:
==========
short description:
289x11 @ 3179Mhz, Mach2 GT cooling
Rig in my sig, figured id give this a bump.
http://img.photobucket.com/albums/v701/pp_mguire/X22805SLIXP.jpg
http://img.photobucket.com/albums/v701/pp_mguire/X22805SLIXP.jpg
