NeverBackDown
AMD Enthusiast
Bitfenix imo are better but personally wouldn't be my first choice of fans.
switch 810 case fans
- Thread starter TheLastRebel
- Start date
TheLastRebel
New member
well ya i agree but as i said i like good looking fans with great airflow ad decent pressure
NeverBackDown
AMD Enthusiast
Look at the Corsair AF 140 LED fans? You are looking for airflow fans, static pressure shouldn't be a concern.
TheLastRebel
New member
those dont have that good of airflow based on the specs but i may just not worry bout all in one water cooler and get a realy good air cooler
NeverBackDown
AMD Enthusiast
Better off with an AIO dude.
TheLastRebel
New member
ya but it may not reach being bottom mounted
NeverBackDown
AMD Enthusiast
Put it in the top.
TheLastRebel
New member
but they dont have a all in one that will take up the entire top bay im anal about things
NeverBackDown
AMD Enthusiast
Put the h100i in the top and it won't take up the top bays, which i doubt you would use anyway.
TheLastRebel
New member
im calling the top part that u can install the rad in as a bay
NeverBackDown
AMD Enthusiast
So the area under the top vents? If so just put the fans in their and then the rad underneath them in the main chasis.
TheLastRebel
New member
you know i could just got 120s i may get the coolermaster jetflow 120s
Last edited:
Surfie
New member
TheLastRebel.... You are going to have to make some hard decisions, and soon.
I've seen two threads now where you are asking for assistance and yet seem to be being contrary to the people trying to help you.
I get that you are planning and that you are not certain yet what cooler you will get, but that decision can also affect other things. For instance, if you were to get an air cooler, then you need a set of specifications to be met by whatever case you get to meet or exceed or else the cooler won't fit. Same thing if you go for an aio cooler, but the needs change. Likewise if you intend to go custom loop later on.
I think it would be really helpful for everyone if you could tell us what you have already got decided, what you need the build to meet (quiet? High performance? Something else? ), and what you own preferences are, so that we can actually assist you properly....
Edit: Kudos to NeverBackDown as well for his patience so far.
I've seen two threads now where you are asking for assistance and yet seem to be being contrary to the people trying to help you.
I get that you are planning and that you are not certain yet what cooler you will get, but that decision can also affect other things. For instance, if you were to get an air cooler, then you need a set of specifications to be met by whatever case you get to meet or exceed or else the cooler won't fit. Same thing if you go for an aio cooler, but the needs change. Likewise if you intend to go custom loop later on.
I think it would be really helpful for everyone if you could tell us what you have already got decided, what you need the build to meet (quiet? High performance? Something else? ), and what you own preferences are, so that we can actually assist you properly....
Edit: Kudos to NeverBackDown as well for his patience so far.
Last edited:
TheLastRebel
New member
i agree with u and neverbackdown i think im gona go with a all in one and mount it like u said and maybe be able to get it in push n pull just maybe idk but fan wise idm a lil noise but i just dont want it sounding like a wind tunnel but i want great perfermance with desent pressure from the fans so i can use the same fan on my rad as my case surfie i allready have my case its a switch 810 and yes later on im gona do a custom loop its just atm i wont have enough to do custom loop as well as the build would it be over kill to only use the corsair sp120s on my entire case and the rad well i said all in one i mean im gona get the switech H20-320 elite kit and then later ill upgrade it when i get the money
Last edited:
NeverBackDown
AMD Enthusiast
I agree... and thanks for the kudos
Are you going to get the h100i or H320(have to order from outside US to get this, due to legal issues)? H320 already have great fans that are semi silent and the h100i has loud fans but perform better by a few degrees. For the h100i you could just slow them down and not worry about it if is to loud for you.
TheLastRebel
New member
I agree... and thanks for the kudos
Are you going to get the h100i or H320(have to order from outside US to get this, due to legal issues)? H320 already have great fans that are semi silent and the h100i has loud fans but perform better by a few degrees. For the h100i you could just slow them down and not worry about it if is to loud for you.
ya im gona go with the h3220 im just gona get black/white fans and get a black light hooked up in the case to make it all glow or red leds either gona get swiftech helix fans or the corsiar sp fans and the h20 320 can be baught form frozencpu they got a warehouse in usa im not sure if i can trust that site or not im sure yall can clearify it
Last edited:
NeverBackDown
AMD Enthusiast
On the fan side of things then stick with the stock h320 fans as they are helix ones already and just order another 3 of them to obtain pushpull.
Buy LED strips from Bitfenix or NZXT to light up the case.
Buy LED strips from Bitfenix or NZXT to light up the case.
TheLastRebel
New member
ok so lets see i need to get 9 helix fans so i have all fans in my case matching i know it dont mater im just picky about it ill probly get nzxt strips to match the case im sure that 55 cfm will be ok i kinda wanted a lil more cfm but u know ill take yalls word on it and im curious to know if the pump that the kit comes with and the reservoir on the rad if its large enough to expand on to say the gpu and mboard i think im gona swap the helix fans out for the sp120s since according to the stat they are only 3 db louder but have 1o more cfm and 1 more static pressure but are only 7 dollars more and the price of the build is $2657.96 so its right around what i was shooting for which was 2500
Last edited:
NeverBackDown
AMD Enthusiast
If you are going to watercool the GPU, you will need another rad. The H320 will cope but it will have high temps because it is a thin rad, the motherboard on top of it would just make the system louder.
55CFM is a lot and with 3 intaking thats 165cfm in total. Too much airflow just means a lot of dust and then in hand cleaning the pc more often.
Pump will be able to handle another rad/block.
55CFM is a lot and with 3 intaking thats 165cfm in total. Too much airflow just means a lot of dust and then in hand cleaning the pc more often.
Pump will be able to handle another rad/block.
