suggestions for cpu cooler!!!! 775!!!

[ali_james]

If you don't want to use pushpins you can do this : Linky

Always been planing to do it on my infinity but never got round to it.

For screws: One

And a backplate: Two

However I am at complete loss as to why you want to ditch the ifx? What are the temps like with using some decent fans?

 

[Ghosthud1]

i had a true black 120 on my q6600 and i got a 4.1ghz O/C at 1.48vcore

load was around 52c

really impressive cooler

 

[Youngie1337]

i had a true black 120 on my q6600 and i got a 4.1ghz o/c at 1.48vcore

load was around 52c

really impressive cooler

jesus seriously?

 

[Ghosthud1]

jesus seriously?

yeah seriously, it was in the winter and in my attick so that helped alot

 

[Lynx]

4.ghz under 1.52? not a chance, proof or it never happened.

 

[tinytomlogan]

4.ghz under 1.52? not a chance, proof or it never happened.

Some quads have seen 500fsb! But your everyday chip has no chance, 1.52v AND he fully loaded it does sound low to me aswell though. Ive got them to boot at 1.5 but never run at 100% and be stable

Might have just been a very good chip though

 

[Ghosthud1]

it was a superb chip and i should have a screenie somewhere

 

[Lynx]

Well get it up then mate

 

[Ghosthud1]

Well get it up then mate

digging deep into my externals and..........taaaa daaa



it was 4ghz but still a good overclock

 

[Lynx]

Wow that was a good chip, must have had some excellent cooling to keep it at 51 @ full load 1.49 ghz! Gratz

 

[tinytomlogan]

Very low VID on that chip, hope you frame it or make it a keyring when you are done

 

[Ghosthud1]

Very low VID on that chip, hope you frame it or make it a keyring when you are done

my lucky mums got this chip in her system, thanks to the best son in the worlds

 

[sammytomjohn]

right guys i have tried my ifx-14 cant fit 2 fans in there! my cpu idles @ 37* according to cpu-z and core temp only problem is that it dont fit in my wavemaster case!

i cant get the door on!

can any1 suggest a good cooler that is not large in size?

the case is a cooler master wavemaster also i am usin a gigabyte x38-ds4 which has quite a large northbridge heatsink!

 

[monkey7]

In which directions doesn't it fit and how much smaller does the cooler have to be in those directions?

 

[Ghosthud1]

right guys i have tried my ifx-14 cant fit 2 fans in there! my cpu idles @ 37* according to cpu-z and core temp only problem is that it dont fit in my wavemaster case!

i cant get the door on!

can any1 suggest a good cooler that is not large in size?

the case is a cooler master wavemaster also i am usin a gigabyte x38-ds4 which has quite a large northbridge heatsink!

all this money your sepnding on coolers why not just go for a single rad watercooling kit like the xspc kit

 

[Lynx]

Or just get a 240 version, 240 rads are basically the same price.

 

[Ghosthud1]

Or just get a 240 version, 240 rads are basically the same price.

its a wavemaster.....

i think he only has space for a 120mm and theres no mods needed for a 120, and a single 120 is more then enough for a quad core

 

[Lynx]

Hardly.. Swifttech H20-120 MAYBE..

But another kit will not let ya budge past 3.4 with good temps

 

[sammytomjohn]

when i say it doesnt fit i mean i can not get my side panel back on

i need it to be about 5cm shorter but i will check my dimensions now!

just to give you the idea of what is wrong here are 2 pics!

i dont wana watercool this 1 just get some fresh air in the system!

 

[Lynx]

Wahey my gpu, Cut a fan hole in the panal and extrenally mount it? (the fan being on the outside of the case?