yassarikhan786
New member
It looks fantastic, but I think the ODD ruins the front panel. It would have been better if it was white, but nonetheless it looks fantastic overall.
Project White Knight : Air Cooling at it's Best..
- Thread starter naveen58
- Start date
Well done Naveen. I love the paintjob and the pick of colores.
Thank You Buddy.
Thanks Man,i'm getting that a lot about ODD but truth be told in person it doesn't looks that bad,looks more like blended when seen in person.
may be it has something to do with my bad photography skills?
yassarikhan786
New member
It's not that bad tbh. It's just not to my taste. It doesn't take anything away from the awesomeness of this mod, so no worries.
Good to hear that.
will surely be doing a stealth mod on my next build which will follow soon.
yassarikhan786
New member
Good to hear that.
will surely be doing a stealth mod on my next build which will follow soon.
Nice, will be looking forward to seeing that as well
Please god put a stealth flap or paint over the odd, ruins a beautiful buildotherwise looks amazing, especially the ssd mount
hmm,will have to give it a thought.
UPDATE - 29/01/2012
Not a Huge Update to be honest,nevertheless an Update
started putting the hardware back in the case,GPU goes first.
in goes GPU Power Cables and PSU
some cable management on the back side,not yet finalised
a look from the back
and finally the package we've all been waiting for has arrived
it's very sad to see Nils drawing like that
Apologies for late Post
UPDATE - 06/02/2012
Time to see what Nils sent me
it's a T-REX,Run for your Life
anic:
ohh wait,it only eat connectors :thumbsup:
Time to Crimp some Custom Length Cables but for that i need Cable,time for a little shopping
searched around my whole city but finally the hard work paid off,i got what i wanted
Presenting Automotive Cable
18AWG Black Cable with Copper Strands :victory:
Time to Crimp my First Cable,from PSU to Molex Female
STEP 1- Cut Equal length Cables
Done
STEP 2- Peel the insulation 5mm,for this i used a scale to mark the insulation & TADA :yesss:
Done
STEP 3- Crimp ATX Power Using Crimping Tool (My First Ever Crimp) :admire:
Me Likes
STEP 4- Crimp the other Side with a Plier
Done.
End Result
Next Up,SATA End Cable for ODD as well as SSD
Final Result
Looks Good
Now time to Crimp the last Cable which will be used for 2 HDD's
All you Need is Brute Force to get these cables in :builder:
One Connector in,one more to go but first lets sleeve it else :facepalm:
measured 3cm sleeves
in they go
followed by shrinks & second power connector
Testing
Good.
Next Up Crimping ATX Connectors on other end
Done
Let's sleeve all Crimped cables
first up molex power cable
next up sata cable
managed to skip few photos of the other two crimped cables :-/
all crimped & sleeved cables
Well,that's it for now.
UPDATE - 06/02/2012
Time to see what Nils sent me
it's a T-REX,Run for your Life
anic:
ohh wait,it only eat connectors :thumbsup:
Time to Crimp some Custom Length Cables but for that i need Cable,time for a little shopping
searched around my whole city but finally the hard work paid off,i got what i wanted
Presenting Automotive Cable
18AWG Black Cable with Copper Strands :victory:
Time to Crimp my First Cable,from PSU to Molex Female
STEP 1- Cut Equal length Cables
Done
STEP 2- Peel the insulation 5mm,for this i used a scale to mark the insulation & TADA :yesss:
Done
STEP 3- Crimp ATX Power Using Crimping Tool (My First Ever Crimp) :admire:
Me Likes
STEP 4- Crimp the other Side with a Plier
Done.
End Result
Next Up,SATA End Cable for ODD as well as SSD
Final Result
Looks Good
Now time to Crimp the last Cable which will be used for 2 HDD's
All you Need is Brute Force to get these cables in :builder:
One Connector in,one more to go but first lets sleeve it else :facepalm:
measured 3cm sleeves
in they go
followed by shrinks & second power connector
Testing
Good.
Next Up Crimping ATX Connectors on other end
Done
Let's sleeve all Crimped cables
first up molex power cable
next up sata cable
managed to skip few photos of the other two crimped cables :-/
all crimped & sleeved cables
Well,that's it for now.
yassarikhan786
New member
Sleeving looks fantastic
.
Matthias2437
New member
You have some insane skills my friend. Great job with the build!
daantjuh44
New member
That's looking great !
Your Wish is my Command
you'll like this Update as now it's going to be stealth ODD.
Thank you for the positive feedback
Thank You
Nice work as usuall Naveen
Glad you liked it
Thanks Buddy,i'm sleeving for the first time and hope to improve it a lot
Nice sleeving job
Thank You
Thank you buddy for your wonderful feedback.
UPDATE - 10/02/2012
Since this is a tower case the 24PIN and 8PIN cables were little short of reaching the Power Supply & i didn't plan to Crimp any cables in this build i had bought extension cables earlier.
so,instead on crimping new cables and sleeving them i'm using extensions in this build,i know it's not that sleek or clean to look at but the show must go on as this is not going to be my last build,rather it's my first one
so,i had bought NZXT Pre Sleeved cables (Yeah,i didn't plan to do sleeving in this build either.How silly i was but Nils came to Rescue
.My Build looks much nicer now)
here's the 8PIN cable before sleeving
and here it is after
that's more like it
here's the 24PIN before sleeving
and seems like i've forgot to take pics after MDPC Sleeving :facepalm:
but i'll take it and post it,so hold on to this
and a package arrived today
it's a package from our Lian Li main dealer,he's a gamer and is active on the forums.
so,he suggested me about this faceplate for more cleaner look of the front panel and i bought it rightaway.
so,Cheers to him
and this is off to paint now
now the only puzzle remaining in this build is this
it's a power cable for NZXT Presleeved LED Kit,let's rip off the sleeve
unfortunately it's a lot smaller than what i need,it's AWG24 cable and i searched for it a lot in my whole city but was unable to find any
apart from this are few screws which are on their way to me
so,stay tuned
Since this is a tower case the 24PIN and 8PIN cables were little short of reaching the Power Supply & i didn't plan to Crimp any cables in this build i had bought extension cables earlier.
so,instead on crimping new cables and sleeving them i'm using extensions in this build,i know it's not that sleek or clean to look at but the show must go on as this is not going to be my last build,rather it's my first one
so,i had bought NZXT Pre Sleeved cables (Yeah,i didn't plan to do sleeving in this build either.How silly i was but Nils came to Rescue
here's the 8PIN cable before sleeving
and here it is after
that's more like it
here's the 24PIN before sleeving
and seems like i've forgot to take pics after MDPC Sleeving :facepalm:
but i'll take it and post it,so hold on to this
and a package arrived today
it's a package from our Lian Li main dealer,he's a gamer and is active on the forums.
so,he suggested me about this faceplate for more cleaner look of the front panel and i bought it rightaway.
so,Cheers to him
now the only puzzle remaining in this build is this
it's a power cable for NZXT Presleeved LED Kit,let's rip off the sleeve
unfortunately it's a lot smaller than what i need,it's AWG24 cable and i searched for it a lot in my whole city but was unable to find any
apart from this are few screws which are on their way to me
so,stay tuned
daantjuh44
New member
I had the same exact problem !
