PrimiChill ICE fluid

mojo1990

New member
How long can you store these fluids before use?

Fluid



I got mine yesterday but I am still waiting on my case to arrive, so in the mean its tucked away it in my room (relatively cool environment).

Do I have to keep it in the Fridge?
blink.gif
 
I kept mine in the fridge,system was like 9 degrees when i booted it up first time on wc
laugh.gif

Cool
cool.gif


One more thing, I heard the colour sticks to everything if you don't clean the loop every once in a while? How often would you need to rinse the liquid and re-bomb?
 
Cool
cool.gif


One more thing, I heard the colour sticks to everything if you don't clean the loop every once in a while? How often would you need to rinse the liquid and re-bomb?

Looking for a good answer for this myself. I am assuming every 6 months from what I have been reading.

Oh FYI your using the gold color right? Did you get dye bombs for it? I actually ordered 2 bottles of it and ended up using almost both dyes as only using one gave a very faint gold color but I only used one bottle to fill my loop. Just some info I found out for what it's worth. I will probably be on the hunt for gold colored tubing in the future so I won't have to worry so much about cleaning the inside of the blocks. Course I think about this AFTER everything is up and running...oh well never ends I guess.

What type of RES you using? If it's multi option I highly suggest using drain and fill ports....if that is an option. made filling and draining sys really easy.
 
Looking for a good answer for this myself. I am assuming every 6 months from what I have been reading.

Oh FYI your using the gold color right? Did you get dye bombs for it? I actually ordered 2 bottles of it and ended up using almost both dyes as only using one gave a very faint gold color but I only used one bottle to fill my loop. Just some info I found out for what it's worth. I will probably be on the hunt for gold colored tubing in the future so I won't have to worry so much about cleaning the inside of the blocks. Course I think about this AFTER everything is up and running...oh well never ends I guess.

What type of RES you using? If it's multi option I highly suggest using drain and fill ports....if that is an option. made filling and draining sys really easy.

Am using the XSPC 750 dual Bay Pump+ Res combo

Thanks for the suggestion
 
I used a primochill dye bomb,and to be honest it didnt hardly put any colour in,so have ordered another dye to go in.

don't forget biocide,and system anti corrosion protection to.
 
Your system will need treating even if you just put plain water in,after a while your components can become corroded and algae can build up the same as it does in a fish tank pump.

Without treatment your running a big risk.
 
If using a pre mix you do not need a biocide at all it comes with it. Premixes should be changed between 6 to 9 months regular how ever they can last upwards of 1 year. Primochill dye bombs are rubbish. there weak and pants.

1 drop of dye can = up to 6 dye bombs.
 
I couldn't get no mayhems blue,everywhere out of stock
wink.gif
,had to order some othe stuff so will have to see what thats like.(when it finally arrives!)
 
please im not advertising said brand (MD) , i think primo chill in a un-bois opinion is rubbish.

The reason why i say this is because i been running tests on several dyes over the last few years and the primo chill is not just a dye but it all so has other stuff in it that is not good for the water cooling. Now when primo Chill tried to mix there dye bomb and there liquid and see it pre packaged it actually broke down in the bottle. So they pulled that and went back to dye bomb and liquids. All so the fact that you have to put more than 1 in again is bad.

Fair enough they are cheap i think if you look around you can get for as little as £1.00 a dye but the amount of extras that go in your systems with each bomb is not good.

This is a personal opinion based on facts though not "just because i don't like it".

2 vids below - yes 1 is mine -

http://www.youtube.com/watch?v=yc7eXnItdIM

http://www.youtube.com/watch?v=8IFqjIsh8uk

P.s you can get MD you just need to know were to go.
 
That's the primochill in my system,and as you can see it's barely visible,and that was only about 2/3rds of a litre coolant.



I have ordered some of this stuff for colouring at the moment,but seems to be taking a rather long time to arrive.

Where can i get some of the mayhems dye?,looks a much better colour tbh.

I did use a primochill utopia bomb also in the system as an additive i might add,so not sure if there as crap as the dyes?
 
if you in the UK send me a PM with what colour you like and ill send you some "free". no problem.

BTW to any one else on this forum reading this.

1) Im not hear to sell any thing from my shop

2) Do not pm, me asking if ill sell you some
 
Back
Top