Post A Picture of Your Last Purchase
- Thread starter MrKambo
- Start date
paulstung
New member
That was my plan, but Scan has hit again, ordered my fittings yesterday, only to get an Email last night saying they're out of stock. It's going to take 3 days for the refund to come through. Every single order I have placed with Scan, has had something out of stock on, even though it shows as in stock, live stock my arse.
SuB
The Webmaster
fittings stuff, I'd be getting from specialtech matey
Rogster
New member
scan are fuckers for doing that! if they havent taken the money from your account merely "reserved it with most" you can get it back quicker same day or a few hours as they are building interest then the cancel it but they will make you aware that the company can take it even if they are refunding it & you will be charged what ever fee the bank has in place for going over drawn or whatever i have been playing that game with banks for ages & never been charged!mind you i squeak when i walk im so tight with money
my shizz from scan sat delivery
Last edited:
paulstung
New member
That's my usual stop mate, but the EK 16mm od in black nickel are out of stock, well they have 2 in stock, but I need another 10, I've got 5 already. I don't want to spend 2 much on my first attempt, in case I make a balls of it, I'm not the most patient of people, if it turns out ok, I'm going to go with the new Bitspower 2 piece compression style, at the end of the year when I upgrade my GPU's.
They have the 12mm in stock, but I think in the Enthoo Primo, they will just look too thin, my first loop was in a Phantom 630 with 13/10mm hose and it looked stupid. No matter what I need to wait for the refund from Scan to show up my end before ordering more, bloody pre pay credit cards, actually bloody ex wife killing my credit score, :nutkick: double :nutkick:
scan are fuckers for doing that! if they havent taken the money from your account merely "reserved it with most" you can get it back quicker same day or a few hours as they are building interest then the cancel it but they will make you aware that the company can take it even if they are refunding it & you will be charged what ever fee the bank has in place for going over drawn or whatever i have been playing that game with banks for ages & never been charged!mind you i squeak when i walk im so tight with money
my shizz from scan sat delivery
I had a long phone call of some guy earlier from Scan, on the product page have you ever seen a low stock symbol next to the buy now tab ? I've never seen it, but they say it's there
Last edited by a moderator:
Kei
Member
Just had specialtech do that to me, except they didn't even send the email to tell me that the items I chose which were listed as in stock are in fact not in stock. Meaning that the build planned for the long weekend is in fact stuffed. Add insult to injury ocuk sent me a returned xspc photon 270 res which was well abused. At least the new enthoo primo case was ok. (not that i can do anything with it)
paulstung
New member
I feel your pain mate, my long weekend is stuffed too. I even managed to get the whole family including the dog away until Monday afternoon, I might have to get prepared for a Titanfall weekend, if the servers are ok and there are actually people around to play with. It has been a bit of a bust lately, since the DLC, the beta was more stable.
Not sure I posted this when I Pre-ordered it, but it *should* arrive today, found someone who had it in stock in the UKOnly had one, and it's now mine!
Asus PB287Q 28 inch Widescreen Ultra HD 4K LED Monitor
Oooo 4K very nice, will this be for gaming? I've not really looked into it but are your graphics cards able to cope with it?
SuB
The Webmaster
Yess it is, and I imagine it will give them a very hard time, but I'm happy to run scaling etc.
I couldn't turn it down at the price. Linus' review was pretty good so I'm confident it'l be a nice screen
SuB
The Webmaster
, i was in dire need of some
Zoot
Active member
Finally updated my anemic 1600x1200 Acer AL2023 monitor that I got way back in 2007 with this BenQ GL2450HM one.
I was going to get the Asus VG278HE (144Hz) that can take a G-Sync module, but I decided it was a waste of money since I'm not a competitive FPS gamer, nor does tearing bother me at all really, in fact I rarely notice it.
I was going to get the Asus VG278HE (144Hz) that can take a G-Sync module, but I decided it was a waste of money since I'm not a competitive FPS gamer, nor does tearing bother me at all really, in fact I rarely notice it.
After getting one of these from a forum member...
I decided I would need two of these...
One of these...
And one of these to neatly fit the valve under my radiator...
Then I got one of these so I could get the loop to neatly exit my tube res...
And now after dropping £55 on Bitspower fittings after my original £90 of Primochill fittings i'm just wondering if I could really do with about £50 of Bitspower 1/4" stop plugs to replace all of the standard EK and Alphacool blanks in my rig.... and then do I get the low profile ones or chuck another £15 at it and have the ones with the pretty dragon
JR
I decided I would need two of these...
One of these...
And one of these to neatly fit the valve under my radiator...
Then I got one of these so I could get the loop to neatly exit my tube res...
And now after dropping £55 on Bitspower fittings after my original £90 of Primochill fittings i'm just wondering if I could really do with about £50 of Bitspower 1/4" stop plugs to replace all of the standard EK and Alphacool blanks in my rig.... and then do I get the low profile ones or chuck another £15 at it and have the ones with the pretty dragon
JR
SuB
The Webmaster
After getting one of these from a forum member...
I decided I would need two of these...
One of these...
And one of these to neatly fit the valve under my radiator...
Then I got one of these so I could get the loop to neatly exit my tube res...
And now after dropping £55 on Bitspower fittings after my original £90 of Primochill fittings i'm just wondering if I could really do with about £50 of Bitspower 1/4" stop plugs to replace all of the standard EK and Alphacool blanks in my rig.... and then do I get the low profile ones or chuck another £15 at it and have the ones with the pretty dragon
JR
HAHA! you got the bitspower bug!!
The wrong screen arrived today.. somewhat gutted
PB278Q instead of the PB287Q all amazon's fault lol
