OC3D Review Asus Sabertooth X58

I like it. A lot.

You could do a wicked cammo computer using that. I was thinking about it the other week as it goes. There's this company in the USA that dips things in this weird cammo stuff and it coats it. They used it on American Chopper once to do a military chopper.
 
Indeed a cool looking board al tho i really loved this one,

2mdfccg.jpg


cool.gif
 
Wow.. saw it on overclockers a couple of days ago and quite liked it. I think it'll fit in perfectly with a Maelstrom and a pair of MSI Hawks for a good "Military" theme... and then maybe strap a couple of USB 3.0 cannons and machine guns.. and possibly put it in a tank.
 
Wow! I joined the site just because last week I happened to upgrade to an i7 950 (not realising there had been a price drop) and picked up the Sabertooth X58 (store recommendation) to replace my aging P4 board...I'm not an overclocker so I didn't know what to expect, but your reviews of these two core pieces of my new system sure make me happy that I bought them.

Now, Tom, I'll be waiting on that overclocking vid you promised to make...I'm going to need it. If I can unleash a bit more power you'll make me a happy man!

Nice reviews. Keep it up.
 
Well it is now, but BTW same temp I'm getting with OC and without - not so bad I recon.Under prime and superpi32M at 3.8 GHz I'm getting 80C and this is too much I beleive.

One question, what is best QPI voltage when CPU set at 4 GHz

Is there any VTT voltage?

And should I leave PLL voltage at Auto?
 
Black said:
Well it is now, but BTW same temp I'm getting with OC and without - not so bad I recon.Under prime and superpi32M at 3.8 GHz I'm getting 80C and this is too much I beleive.

One question, what is best QPI voltage when CPU set at 4 GHz

Is there any VTT voltage?

And should I leave PLL voltage at Auto?
Click to expand...

qpi volts depend on the memory speed an amount.

leave the pll at auto as it shouldnt matter.

If you are getting 80c what cooler/vcore are you using?

Whats you bclk and multi?
 
I'm using watercooling for my CPU mate, BCLK 190, multi x20 and vcore 1.225v, RAM 1531 Mhz - 1.64V, QPI voltage 1.25v

I notice when only prime running max I can get on NB temp is 72 C - idle still 65 C.
 
Black said:
I'm using watercooling for my CPU mate, BCLK 190, multi x20 and vcore 1.225v, RAM 1531 Mhz - 1.64V, QPI voltage 1.25v

I notice when only prime running max I can get on NB temp is 72 C - idle still 65 C.
Click to expand...

ram 1.66

qpi 1.45 (for 1600mhz)

turn on LLC

you should get 200 bclk with that and a few more tweaks.
 
Hi,

Does anyone know if its ok to put a single HD 6870 in the lower PCI express x16 slot, so the regular PCI slot is free for my old soundcard? I think its the "secondary" x16 slot but if I'm thinking if only using one card, all 16 lanes should be available?

Thanks in advance
 
PINS said:
Hi,

Does anyone know if its ok to put a single HD 6870 in the lower PCI express x16 slot, so the regular PCI slot is free for my old soundcard? I think its the "secondary" x16 slot but if I'm thinking if only using one card, all 16 lanes should be available?

Thanks in advance
Click to expand...

The black is x4 - The beige ones are both 16x
 
You must log in or register to reply here.

Similar threads

WYP
ASUS B850 and B850M TUF Gaming WIFI Preview
Replies
0
Views
825
WYP
WYP
WYP
ASUS RTX 5080 GPU listed for €1699.95 in Europe
Replies
10
Views
2K
Dawelio
Dawelio
WYP
ASUS launch 20Gbps TUF Gaming A2 SSD enclosure
Replies
1
Views
121
NeverBackDown
N
WYP
ASUS ROG NUC 970 Review
Replies
0
Views
173
WYP
WYP
WYP
ASUS ROG RTX 5080 Astral Review
Replies
0
Views
148
WYP
WYP
Back
Top