need some help on 1090T overclocking

[z3bb0]

Well I was running my 1090T on 1.29 volts (@ 3.8ghz no turbo 200x19) and the rest of the volts on auto when my cpu crashed as soon as I logged in and the computer restarted and the bios said computer crash beacause of overclocking. is my volt for the cpu to low? using H50 in pushpull and I'm not getting above 55c no matter what benchmark I'm doing

 

[kilobravo]

Manually set specified ram timings and volts,should help on stability.And maybe a nudge or two up on volts.

What mobo are you using?

A better system info and bios settings would help

 

[dugdiamond]

what mobo, BIOS version and RAM are you using?

 

[z3bb0]

what mobo, BIOS version and RAM are you using?

formula Iv is the mobo and Bios is American megatrends inc verson 1102

my ram is 2gb x2 crucial 8-8-8-24 1600mhz and now I see that their getting undervolted by mobo think mobo is running it at like 1.5 but they're rated for 1.65 can that be it?

 

[dugdiamond]

if the ram says it NEEDS 1.65v to run at those timings and speed, then it must also be altered in BIOS too.

one of the most common problems people face when trying to overclock is forgetting the RAM timings

 

[z3bb0]

if the ram says it NEEDS 1.65v to run at those timings and speed, then it must also be altered in BIOS too.

one of the most common problems people face when trying to overclock is forgetting the RAM timings

since I'm kinda a noob of this

, should I set the volt from auto to 1.65 and change it in the list 1066 1333 1600 etc list to 1600 since it's actually running at 1333 tried 1600* got alot of stability probs

 

[z3bb0]

it's running everything rated now, it didn't before I noticed

 

[dugdiamond]

yay - cool