Edgeyforsure
New member
well, here is my rig claude, runnign windows 7 64bit
http://img593.imageshack.us/img593/1605/claude.png
desk shot
http://img403.imageshack.us/i/dsc00339h.jpg
Front shot (2x 120mm intakes, one at the bottom one in the 3x spair bays)
http://img59.imageshack.us/i/dsc00340qf.jpg
side pannel shot (side fan/rear fan is exhausting) both are coolink fans reviewd by tom a little in his cooler review
http://img203.imageshack.us/i/dsc00341s.jpg
yes that is a 4870x2 squeezed inside there, ide temp is around 35c with load only just touching 50c (stock cooler with this card idle is around 70-80c, and load as much as 95c)
http://img33.imageshack.us/i/dsc00338o.jpg
http://img688.imageshack.us/i/dsc00351uc.jpg
altho it did require abit of modding with some tin snips....
http://img148.imageshack.us/i/dsc00345wn.jpg
arctic 7 cooler - my cpu clocked @ 3.2ghz is around 24c idle and around 40 - 42 load
http://img19.imageshack.us/i/dsc00347kd.jpg
cable management is HARD in this case... tried my best, and its as good as its gonna get.
http://img202.imageshack.us/i/dsc00343k.jpg
lost the picture of the back pannel, but it bulges out
top pci card is my wireless card (mostly wired to the router tho)
seccond is the HD 4870x2 with the AC extreme, taking up THREE pci slots
you may be wondering what the white stuff over the fan holes are, well its actualy some hard foam kinda stuff that came with my PSU's packaging, i cut it to size and cable tied it in there so it is forced to suck air from only where i want it too
http://img508.imageshack.us/i/dsc00349sz.jpg
http://img69.imageshack.us/i/dsc00348f.jpg
any questions just ask, its not the most expensive, nor the nicest looking rig on here, but it suits me and im proud of it. it was the first computer i ever built on a VERY tight budget and i am impressed with how it all worked out. any other suggestions welcome aswel
http://img593.imageshack.us/img593/1605/claude.png
desk shot
http://img403.imageshack.us/i/dsc00339h.jpg
Front shot (2x 120mm intakes, one at the bottom one in the 3x spair bays)
http://img59.imageshack.us/i/dsc00340qf.jpg
side pannel shot (side fan/rear fan is exhausting) both are coolink fans reviewd by tom a little in his cooler review
http://img203.imageshack.us/i/dsc00341s.jpg
yes that is a 4870x2 squeezed inside there, ide temp is around 35c with load only just touching 50c (stock cooler with this card idle is around 70-80c, and load as much as 95c)
http://img33.imageshack.us/i/dsc00338o.jpg
http://img688.imageshack.us/i/dsc00351uc.jpg
altho it did require abit of modding with some tin snips....
http://img148.imageshack.us/i/dsc00345wn.jpg
arctic 7 cooler - my cpu clocked @ 3.2ghz is around 24c idle and around 40 - 42 load
http://img19.imageshack.us/i/dsc00347kd.jpg
cable management is HARD in this case... tried my best, and its as good as its gonna get.
http://img202.imageshack.us/i/dsc00343k.jpg
lost the picture of the back pannel, but it bulges out
top pci card is my wireless card (mostly wired to the router tho)
seccond is the HD 4870x2 with the AC extreme, taking up THREE pci slots
you may be wondering what the white stuff over the fan holes are, well its actualy some hard foam kinda stuff that came with my PSU's packaging, i cut it to size and cable tied it in there so it is forced to suck air from only where i want it too
http://img508.imageshack.us/i/dsc00349sz.jpg
http://img69.imageshack.us/i/dsc00348f.jpg
any questions just ask, its not the most expensive, nor the nicest looking rig on here, but it suits me and im proud of it. it was the first computer i ever built on a VERY tight budget and i am impressed with how it all worked out. any other suggestions welcome aswel
