My Obsidian 650D

[trazomfr]

Hello all.

Here are some pictures of my new PC. I have not made ​​up of many changes. there is the location of my SSD and my hard drive that have changed. I will certainly try to replace my fan up to two 140mm fans in a short time to see if there is a gain cooling.

If you have any ideas or suggestions please do.

 

[jonowee]

Nice headphones, very nice... oh there's a computer there as well.

Specs please.

 

[sg12004]

nice rig m8

 

[ruthless_villain]

nice rig, where have the HDD Cages gone???

 

[T.A.K]

I love the all black. How is the Razer Naga? I had one and it started double clicking for every single click. I have no idea what is wrong with it and just use my old logitech now.

 

[noexe]

lovely rig,clean and tidy good job

 

[trazomfr]

Nice headphones, very nice... oh there's a computer there as well.

Specs please.

Thank you for my headphones ... and my computer.

It is still new and needs to drop a little but its amazing what he already does! I receive a small tube amplifier this week to finish the audio side of my instalation.

The headphone is a model Sennheiser HD 650 plugged into a sound card Asus essence STX. No equalizer and set to high gain amp side of the sound card. The headphones with impedance of 300 ohms is a suitable adjustment I think.

For the computer the following components: Asus Sabertooth X58, Intel Core i7 920, 3Go of Corsair Dominator ram, Corsair cooling H70, BigFoot Killer NIC 2100, EVGA GTX 480 graphics card, Corsair AX 850, SSD Intel 80 GB legacy without TRIM for Windows 7 64 bit and WD Velociraptor 150 Go for games. To play like I use a Sennheiser PC350 headset. That, I think I have everything listed.

nice rig m8

Thank you very much.

nice rig, where have the HDD Cages gone???

Thank you.

I found the cage for hard disks / SSDs reminded me a building

and a first time I removed the cage from the top. I checked the temperature of my hard drive and my SSD and they were very cold. I searched how to move every two to let the empty part of the fan and do not break the flow of air. After much research I found this: The Feser Company. I fixed my Vélocirator above and it was perfect. It only remained to find a location for my SSD. I thought I'd stick with double sided tape or velcro to detach easily but in compartment below the cage I saw a hole remaining. I placed my SSD and stamped like that.

I love the all black. How is the Razer Naga? I had one and it started double clicking for every single click. I have no idea what is wrong with it and just use my old logitech now.

Thank you.

I also love the all black. My razer Naga works very well I hope not to have the same problem as you later. Have you tried other drivers from your problems? I hope you have returned to be refunded or you will get it fixed because it is quite expensive.

lovely rig,clean and tidy good job

Thank you very much.

This is my second build and without reading your builds and advice I shall not come easily. Thank you to all forum members and a team

.

 

[Karlos_the_n00b]

Nice and tidy rig with a sabertooth X58. I like it

 

[T.A.K]

Thank you.

I also love the all black. My razer Naga works very well I hope not to have the same problem as you later. Have you tried other drivers from your problems? I hope you have returned to be refunded or you will get it fixed because it is quite expensive.

It is not a driver issue, it is like gunk getting stuck under it. If I click really hard it does it fine. I just need to find out how to get under the piece of plastic to remove said gunk. It would also help if I stopped eating while playing on my computer.

I would wash my hands before using it because loose skin cells start to build up on the side buttons. They wipe off it just takes time to get such small buttons.

 

[trazomfr]

I have no idea of the removal procedure of a mouse. I guess it clipped somewhere to access the innards.

 

[jonowee]

It is not a driver issue, it is like gunk getting stuck under it. If I click really hard it does it fine.

Maybe you could try the firmware updater from Razer. Even thought the 'change log' on the firmware updater I used specified the double clicking issue with my Copperhead.

But it has to noted; yes, the matt rubber coating I love so much, does pick up skin scum much quicker than smooth plastic top mice.

 

[jack-uk]

Nice clean rig there mate

 

[trazomfr]

thank you very much Jack.