The specs are roughly as follows:
Corsair 800D
Corsair AX1200 PSU
Asus Rampage III
Intel i7 950 (just running standard at the moment)
Corsair 6GB 2000Mhz Memory
ATI 5770 1GB GPU (only temporary until a watercooled 580 GTX is available)
Creative XFi Soundcard
Corsair Force 120GB SSD
2 x Western Digital 150GB 10,000rpm
2 x Western Digital 1TB 7,200rpm
LG Blu-Ray Writer/Reader
Lamptron FC5 V2 Fan Controller
XSPC LCD Temperature Readout
XSPC 360mm Radiator
iandh Stealth 225 Reservoir
Laing D5 Pump with Bitspower Top Mod V2
EK Supreme HF Nicel Plexi CPU Block
Bitspower Compression Fittings
Tygon R3603 (Clear)
Feser One UV Red Coolant
Water temp seem to max out around 23/24c, CPU I haven't really tested but i think idle around 30c and under load around 40c. The tubing is clear as said with red coolant, in places it is a little short but also its the pics to a certain extent, the tube going over the memory is short and at the moment I'm unable to fit the Corsair memory fans and LED readout, but at this stage this is what I refer to as stage I, with stage II sorting that out and installing the watercooled GPU. I have seen builds with the pump fitted by the PSU but to be honest I prefer it where I have placed it. The original plan was to go with an ATI 6990 but it is going to be too long and will hit the reservoir (I've got 11"s to play with whereas the 580GTX is 10.5")
