my new 3800+ venice r507 chilled.

D

Dazboots

New member
just started turning the screws up on my 3800+ venice.

had this baby to 3.3 ghz stable..........1.68 volts..

does 3 ghz on stock 1.4 volts.

this memory wont go high as my cpu.

so im running dividers on the memory so not 1:1

going to get some gskill . then 1:1 will be much quicker.......

got 110K aquamark and 26 seconds super pi...

will easy get 25 seconds.......

http://img209.echo.cx/img209/2985/screenhunter0178mr.jpg

just completed 32 meg super pi first run.

did it in 23 min 17 seconds......

http://img167.echo.cx/img167/3213/screenhunter0233mh.jpg

http://valid.x86-secret.com/show_oc?id=14033
 
I feel like I'm repeating myself lol

Great work Daz :cool:

Get that thing burned in, and we'll see how far you can push it...

Still not sure if it's quite an FX-55, but if it'll scale further with voltage, it might just be a better alternative...

If this is what the 90nm does on 512, the sandiego should rock the house :D

Gray
 
Excellent work Daz,

Keep posting them results my friend - u got us all wanting to hear more about the latest AMD wonder chip.

Post your system specs here too - give everyone an idea about what the will need to get similar performance.

Cheers

Mav
 
name='fatty' said:
Nice 1 we want more Daz see what the max is what timmings you using fsb etc
Click to expand...

this ram will only do 264 fsb 1:1

thats 3164 mhz

but if i use dividers and dont go 1:1 had it to 3.3 ghz stable.

need some better ram........ some gskill......

bet when i get this cpu burned in i shud be hitting 3350 mhz stable.....

just priming torture tests now for a while....
 
Sorry, forgot to add,

Have you tried it with 4 sticks of ram yet?

Stretch that mem controller to it's full potential?

Also, I thought 1.55v was the 'safe' limit?? Then again, Daz whebever have you played it safe!! :D
 
maverik-sg1 said:
Excellent work Daz,

Keep posting them results my friend - u got us all wanting to hear more about the latest AMD wonder chip.

Post your system specs here too - give everyone an idea about what the will need to get similar performance.

Cheers

Mav
Click to expand...

thx m8....

my system specs

mach 2 regassed to r507

3800+ venice cpu

4x 512 meg ocz pc4000 vx memory

dfi nf4 d-r- motherboard

2x leadtek 6800 ultras

ehiem 1250 pump

2x dangerden water bay res

blackice extreme rad

phillips external sound card

creative i truigue speakers

2x 74 gig raptors stripped raid 0

250 gig external hard drive 16 meg cache

2x dangerden actel waterblocks

24 inch dell tft widescreen

enermax sli 600 watt psu

logitech dinivo mouse + keyboard.

there u go m8...... ;)
 
Sweet cpu my fx 55 will do 3.3 unstable but 295 x 11 all day long satble so I just keep it there I didnt even realy burn it in I may be able to get more out of her??
 
Daz,

Gskill LE does 300 @ 2.5-3-3-7 3.1v

Probably goes higher but my cpu wont go above 300HTT (even with dividers etc....).

Cheers

Mav
 
maverik-sg1 said:
Daz,

Can't open the link mate, not a bad score.

Fully loaded with windows my FX55 at 268x12 will do 23m07s so that's an impressive score with your venice my friend.

The BH5 I was after is the stuff you had that did 270 @ 2-2-2-6 as per your post earlier this month on this forum - if thats OK?

http://www.extremeprometeia.com/forum/showthread.php?t=1970

Cheers

Mav
Click to expand...

its 2 x 256 meg m8.......... but its like rocking hore ****. is this.......

if u want it its yours........
 
Nah mate I need 2x512MB, make an offer if you want it though, I need BH5 2x512MB that will run 250HTT on non NF4 mobo or 270 on NF4 mobo.

Fatty, how do I find the week (too lazy to open the shuttle to check).

Cheers

Mav
 
You must log in or register to reply here.
Back
Top