My Mach is due today.

[maverik-sg1]

Assuming board is orientated with Ram in top left corner then USB, it's the lowr set you need to plug onto:

From left to right:

Black - Red - Green - White (upper row)

or

Pin Free - Black - Red - Green - White



The black cable should be on the end connector of the plug you have - it's that black connector that fits on the pin after 'pin free' on 2nd row of the USB Header - the rest of teh plug should then cover the other three pins, leaving the 'pin-free' exposed and all other pins on that bottom row covered by the mach plug.

Double cross check the mach connector's description (see link from stocky above) to page 12 of your DFI-NF4-SLI-DR manual and make sure you are satisifed that they all connect to the correct pins (ground to ground black, +data red, -data green and VCC white) before switching on - just a disclaimer if anything goes wrong, we are right but I want to you be sure too.

Mav

 

[Monge]

The USB connector on controller board: White in Pin 1 (Pin 1 writen on PCB)

 

[stocky]

The way I originally found out was just to plug them all into different ones until it worked!

There are photos in the thread (link 4 posts earlier) that show the USB on the control board. Ensure it is the same - mine came wrong for some odd reason! :B

Let us know when you have it up and running

 

[Geomon]

Looks like my max overclock with her is 3.345 at 1.67, am sure she'll do more as its got bad temps of +14 prime for hours. Once it get her tunes up I think she'll do 3.4 no probs.

 

[Monge]

Geomon: USB stuff working now?

 

[Geomon]

Sorry for the lack of updates on this one guys but to tell the truth I had nothing to update as the mach was away for a regas and tune.

This is what arrived back .

http://us.f2.yahoofs.com/bc/430b53d9...yxcqDBEPJZuS4b

http://us.f2.yahoofs.com/bc/430b53d9_ed02/bc/web+pics/good+pic+of+left+side.jpg?BCyxcqDBt.B2iCkp

http://us.f2.yahoofs.com/bc/430b53d9_ed02/bc/web+pics/Pic+of+evap.jpg?BCyxcqDBfHxrZRxa

Its now a fully fledged r402 Chilly1 unit. Its been modded by the great Mr Gray Mole and has a large coil added to disipate the heat.

Thats the basics of it and I'll be upadating this with a few other details about it and a step by step on how its installed (not to help anyone else but for you guys to point out where I've gone wrong,lol.

I hope this pic are working ait the first time I have uploaded pic on a forum.

Anyway guys let me know what you think and I'll update very soon. cheers

 

[mightynimrod]

Sorry for the lack of updates on this one guys but to tell the truth I had nothing to update as the mach was away for a regas and tune.

This is what arrived back .

http://us.f2.yahoofs.com/bc/430b53d9...yxcqDBEPJZuS4b

http://us.f2.yahoofs.com/bc/430b53d9_ed02/bc/web+pics/good+pic+of+left+side.jpg?BCyxcqDBt.B2iCkp

http://us.f2.yahoofs.com/bc/430b53d9_ed02/bc/web+pics/Pic+of+evap.jpg?BCyxcqDBfHxrZRxa

Its now a fully fledged r402 Chilly1 unit. Its been modded by the great Mr Gray Mole and has a large coil added to disipate the heat.

Thats the basics of it and I'll be upadating this with a few other details about it and a step by step on how its installed (not to help anyone else but for you guys to point out where I've gone wrong,lol.

I hope this pic are working ait the first time I have uploaded pic on a forum.

Anyway guys let me know what you think and I'll update very soon. cheers

Links are dead mate

To upload them just create account at photobucket, browse your p.c for pics you want to upload and then copy and paste the url

 

[Geomon]

Sorry about the links, hows about this time?

http://i26.photobucket.com/albums/c112/somemore8463/Picture015.jpg

http://i26.photobucket.com/albums/c112/somemore8463/Picture012.jpg

The pics where hardly worth the wait but I'm sure thing will get interesting over the next few days as I install it.