mazty
Member
I'm looking to create a mini-itx build in the Bit Fenix Phenom case with these basic specs:
ASUS Maximus Impact VII
i7 4790k
Corsair H105
Corsair Pro Vengeance RAM 16GB 2400 Mhz
Corsair RM 650
AMD R9 290
BeQuiet! Silent Wings 2 140mm x 1, 120mm x2 (rear and front)
Taking over my HDD's from my existing PC (3.5" 1TB, 500GB & Crucial 480GB SSD)
As much as I'm sure that will all work when put together, the real issue i'm having is figuring out how to make these parts look decent within the case; red & black seems to have been done to death. Therefore does anyone have any ideas what path to go down with regards to colouring, lighting etc? I was thinking that the XFX R9 290 DD Black Edition may look quite decent as the GPU, and then changing up the PSU for a Sea Sonic Platinum Series 660. That then mixed with the red corsair ram/H105 trimming could visually work?
Cost isn't really an issue, but I am looking for components that are going to be as near silent as possible due to the case being on my desk next to me. Any thoughts would be much appreciated
ASUS Maximus Impact VII
i7 4790k
Corsair H105
Corsair Pro Vengeance RAM 16GB 2400 Mhz
Corsair RM 650
AMD R9 290
BeQuiet! Silent Wings 2 140mm x 1, 120mm x2 (rear and front)
Taking over my HDD's from my existing PC (3.5" 1TB, 500GB & Crucial 480GB SSD)
As much as I'm sure that will all work when put together, the real issue i'm having is figuring out how to make these parts look decent within the case; red & black seems to have been done to death. Therefore does anyone have any ideas what path to go down with regards to colouring, lighting etc? I was thinking that the XFX R9 290 DD Black Edition may look quite decent as the GPU, and then changing up the PSU for a Sea Sonic Platinum Series 660. That then mixed with the red corsair ram/H105 trimming could visually work?
Cost isn't really an issue, but I am looking for components that are going to be as near silent as possible due to the case being on my desk next to me. Any thoughts would be much appreciated
