Memory cooling

[Rackem]

I have just bought some OLD SkOOL BH5 from mav but currently have no active cooling

has any one got any really good ideas?

here's a link to pics of my system

http://www.extremeprometeia.com/forum/showthread.php?t=4879

 

[maverik-sg1]

I will provide you with pics of my fan set-up that works really nice on the EXPERT board - you need 2 80mm fans my friend and some cable ties or a home made bracket to hole em bopth together - I opted for cable ties

 

[Highland3r]

Zalman bracket + 120mm fan should do the job. Mount the bracket on the top PCI "holes" on the case, stick a 120mm on there, should do the job fine.

If theres not enough space with the suction line/80mm should be ok

 

[maverik-sg1]

2x 80mm fans cover the length of the ram - there is not enough room for 120mm fan on the expert.

Expert with 2x80mm fans:

http://www.extremeprometeia.com/forum/attachment.php?attachmentid=180&d=1137951220

SLI-DR with 120mm fan:

Mav

 

[Mr Dizzy]

I have water cooling blocks for memory but dont use them as there a real pain when it come to changeing memory but also i think the fans work better

http://img69.imageshack.us/my.php?image=ramfreezermounted8cv.jpg

 

[Rackem]

I've ordered 2 80mm fans to do the job!!

 

[Mindless-Moron]

i use a single nexus 92mm fan mounted over the ram using the old motherboard riser trick. I feel so inadequate.

but the 120mm i have on a bracket cools the bottom half of hte ram and the end of my gfx card.