Mayhems Radiators
- Thread starter mayhem
- Start date
yassarikhan786
New member
S_I_N
New member
bahhh with the seen one seen them all pahooooy we still need nerd pron daily or we have to find the other kind muhahahahahahahahaha
Earthmonger
New member
So what do we know?
- 120.2 and 120.3 versions
- UK made
- Perform well with 1200 - 1600 rpm fans
Anything else?
- 120.2 and 120.3 versions
- UK made
- Perform well with 1200 - 1600 rpm fans
Anything else?
mayhem
New member
Yeh there are 4 versions of the rad in total we are making .. (that will mess you up a little)
They are heavy as any thing and probably one of the most heavy 360mm rads you can get.
As for testing
our 3 x 120mm (360mm) was 1c off a Thermchill 480mm rad in direct comparison
Our 3 x 120mm (360mm) was 3c better than a HW top of the range 360mm rad. i person said 5c but taking into every one else results we say 3c instead.
(these results have been confined as well)
They are heavy as any thing and probably one of the most heavy 360mm rads you can get.
As for testing
our 3 x 120mm (360mm) was 1c off a Thermchill 480mm rad in direct comparison
Our 3 x 120mm (360mm) was 3c better than a HW top of the range 360mm rad. i person said 5c but taking into every one else results we say 3c instead.
(these results have been confined as well)
Earthmonger
New member
Okay, so either:
A) Normal and stealth versions of the 120.2 and 120.3. That's four.
or
B) If they weigh so bloody much I'm gonna assume they have copper fins. Which puts you ahead of half of the market already. But, aluminum fins may be a second option. That's four.
A) Normal and stealth versions of the 120.2 and 120.3. That's four.
or
B) If they weigh so bloody much I'm gonna assume they have copper fins. Which puts you ahead of half of the market already. But, aluminum fins may be a second option. That's four.
mrDMxtreme
New member
two black ones and two white ones = 4 I think
ruthless_villain
New member
Dont think anyone will make white rads
mrDMxtreme
New member
does that second line mean you will make white rads? or am i interpreting the sniggers at the end wrong?
SparkleDJackson
New member
checked the site
noticed the mixing guide tab
opened the tab to see TBA
noticed the mixing guide tab
opened the tab to see TBA
mayhem
New member
The mixing Guide i haven't had time to update yet. With all the liquids were making its not leaving me with much time. This week ive knocked over 50 box's of liquids (12 per box).
All so redesigned all labels and we now have legal official bar codes on each and every labels from USA and EU.
All so i've now done a Concentrate version of Aurora and Pastel for shipping out of the EU in 250ml bottles.
All so I've implemented a DOM (date on manufacture) sticker on all new bottles. So as you can see ive been hard at work.
This job (company) is harder work that when i was contracting or working in the army and the hours you put in by pass any thing ive done in the past. And the support is all so hard to keep up with but were getting there. Steve has helped a lot and were stream lining as we go along.
Oh buy the way 1 person has the correct answer on what were doing with the rads as in the 4 versions.
I think weve now gone from a home grown business to a fully fledged business because of the work Steve has put into it.
Allso i get my compnay car on Friday whoo who ... Wonder what it will be like driving again.. (pooing my self)
All so redesigned all labels and we now have legal official bar codes on each and every labels from USA and EU.
All so i've now done a Concentrate version of Aurora and Pastel for shipping out of the EU in 250ml bottles.
All so I've implemented a DOM (date on manufacture) sticker on all new bottles. So as you can see ive been hard at work.
This job (company) is harder work that when i was contracting or working in the army and the hours you put in by pass any thing ive done in the past. And the support is all so hard to keep up with but were getting there. Steve has helped a lot and were stream lining as we go along.
Oh buy the way 1 person has the correct answer on what were doing with the rads as in the 4 versions.
I think weve now gone from a home grown business to a fully fledged business because of the work Steve has put into it.
Allso i get my compnay car on Friday whoo who ... Wonder what it will be like driving again.. (pooing my self)
mrDMxtreme
New member
SparkleDJackson
New member
I just hope i can make aurora orange with the supernova and some red and yellow dye
mayhem
New member
Orange looks like wee ..... when not as a pastel.
SparkleDJackson
New member
Damnit. I wanted aurora i guess im gonna need to change to pastel blue an orange fir my setup. Which isnt a bad thing i just love the flowyness of the nebula blue and with the pastel there will be no flowyness. Its still prettyful just not flowy
Earthmonger
New member
oh come on, just tell us who is right
I was, with the copper and aluminum versions.
Master&Puppet
New member
These sound epic! I can see me getting a couple of these for my new project. Copper
M&P
M&P
Similar threads
