Low Voltage Under Load?

[Ravious]

Hello, I have set my voltage to 1.4V in the bios, when i boot into windows, GPUZ says its running at 1.376V idle and at load it goes down to 1.33V. Is this the bios or is it CPUZ that is recording the wrong voltage?Its VCore voltage BTW

Thanks!

 

[Chaney579]

Hello, I have set my voltage to 1.4V in the bios, when i boot into windows, GPUZ says its running at 1.376V idle and at load it goes down to 1.33V. Is this the bios or is it GPUZ that is recording the wrong voltage?Its VCore voltage BTW

Thanks!

Well your problem most likely is that you are using "GPU" z instead of "CPU" z as you are reading the Volts for the graphics cards and not the cpu...

 

[Trixx1992]

Well your problem most likely is that you are using "GPU" z instead of "CPU" z as you are reading the Volts for the graphics cards and not the cpu...

Indeed, you need "CPUID CPU-Z" to monitor your cpu. GPU is for graphic cards.

 

[Ravious]

oops typo. I did mean CPUZ btw. Any ideas?