Loop Upgrade

[tezza192]

Im currently running a cpu only loop in my 600t with a 240mil rad in the roof of my case

Im looking at putting waterblocks on my sli 680s but obviously will have to upgrade my radiator setup, I dont want to cut my case or have external radiators if possible so Im looking at putting a 200mil rad in the front,

Will this loop with the 240 in the roof and the 200 in the front be enough to run a 3770k and sli 680s at stock??

Many thanks

TC

 

[Murphyslaw]

I don't think you'll be able to have more then 1 gpu and the cpu watercooled using only a 200 and a 240mm rad.

pretty sure you'll need more radiators to dissipate the heat.

 

[S_I_N]

well I think its worth a shot I'm runnign dual 6950's on a 280mm rad with decent temps 32c idle and 47c load. And the 6xx series are cooler running cards. What thickness is the 200mm rad?? if its a thin one then prolly not 60mm I'd say give it a go.

 

[FTR.4500MHz]

I had my 2600k ( oc) and 6950's ( oc ) running on a 240 and 120 hw labs GTS ( 30 mm thick , 30 fpi ) in a 600T .

My fans were set up pulling threw the rads , never ran them over 1000 rpm .

My Cpu temps never went above 66° , and gpu's ran @ 54° max .

So i think you could give your idea a try !