hey all
i am doing my 6 monthly cleaning spree to clear all that lovely dust from the insides of my kit.
i have done this before on my laptop, Amilo Pi 2515
one issue though....
once i replaced the heatsink and fan, with new thermal paste (AS5) and replaced all the covers the fan would not work.
i have pulled everything apart again. with no heatsink in place and just the fan plugged up the fan spins. i only do this for a few seconds since i dont want to cook the CPU since it has no heatsink installed.
once i pop the heatsink in the fan wont spin.
i have checked everywhere for a possible short. i have even popped some electrical tape on the ends of the heatsink to try and eliminate any potential shorting.
with no fan in and the heatsink installed i can boot and all works fine. with speedfan showing me temps they climb up to about 45-47 idle but open a vid and they get toasty.
i just can not figure out what i may have done.
any ideas
ED
i am doing my 6 monthly cleaning spree to clear all that lovely dust from the insides of my kit.
i have done this before on my laptop, Amilo Pi 2515
one issue though....
once i replaced the heatsink and fan, with new thermal paste (AS5) and replaced all the covers the fan would not work.
i have pulled everything apart again. with no heatsink in place and just the fan plugged up the fan spins. i only do this for a few seconds since i dont want to cook the CPU since it has no heatsink installed.
once i pop the heatsink in the fan wont spin.
i have checked everywhere for a possible short. i have even popped some electrical tape on the ends of the heatsink to try and eliminate any potential shorting.
with no fan in and the heatsink installed i can boot and all works fine. with speedfan showing me temps they climb up to about 45-47 idle but open a vid and they get toasty.
i just can not figure out what i may have done.
any ideas
ED