High RPM fans

[WarFox101]

Hi fellas I am in the process of swapping out my rad fans and fan controller. I need to find six 120mm and six 140 for a push pull setup for my rads. I was looking at the Cooler Master R4 Excalibur But it only has a max of 2000 RPM. I'm looking for 2600 to 3000.I was also looking at these but im not sure of them http://axiontech.com/prdt.php?item=88574&tab=0&PRICECOMPARISONSID=6df4fe401cbc913e17d777ae0bafd224 I know this is a little much but I would like to have the option to create a wind tunnel in my case

since I have the Corsair 800d its a air flow nightmare. Thanks in advance fellas.

PS: It would be nice to be able to order your own customized fans.

 

[Stryker64]

High airflow? Noise is something you don't care about? Delta 120x38mm Extreme High Speed, 4600RPM, 220 CFM and 65dB. To put that in context, that is as loud as a vacuum cleaner.

EDIT: Sanyo Denki also provide some 4K RPM 200+ CFM fans.

EDIT: Just noticed you wanted 2600-3000 xD. Well the companies I just listed also provide fans at that speed.

 

[Stryker64]

Rexus and Scythe also provide fans at those RPM. I can't really recommend you any, since I haven't personally tried them. Your options are fairly limited since most manufactures don't go above 2,000RPM. You can find these on Newegg.

 

[WarFox101]

Thanks Zeals, I found this 120mm http://us.element-14.com/jsp/search/productdetail.jsp?SKU=96M6251&CMP=AFC-GBE14 they are silver which is nice since I have a silver theme to my case. Only one problem is they don't make a 140mm. Ill keep looking.

 

[JezEngland]

Scan sells summin, 800 - 2400 rpm. i have a 92mm version and it doesn't work without a fan controler:

hmm the link didn't work.

this is Scan's item code for the fan, copy this code:

LN16667

paste it into Scan's search bar

go to Scan here: http://www.scan.co.uk/Shop/Computer-Hardware

this could get a load of them working: http://www.scan.co.uk/products/nesteq-fanmax-8-channel-black-fan-controller

The 92mm version i have has a cable dedicated to plug into the fan controller. i don't know if custom controllers have the required connector. it's a 2 pin on my fan. the fan is about 2 years old

If your keen for this I dont know about the compatability, ask the experts. Can make a thread and Scan has tech's on the phone

 

[Stryker64]

I don't think physics will allow a 140mm to go up to those speeds. If you look at all the pictures of the high RPM fans, they have a really large centre, and small blades, because longer blades will probably snap under such high strain, therefore it would be unlikely for you to find a 140mm fan running at those speeds. So 1,700RPM is probably the highest you'll see. So maybe a Enermax T.P Vegas Duo 140mm LED Fan or Noiseblocker 140mm BlackSilentPro 1,700RPM?

 

[WarFox101]

Well i have decided on my 120mm I picked the Scythe Ultra Kaze 120x38 @ 3000 rpm and 133.60 CFM. I think i will like them I don't think ill push pull these on my triple 120 LOL. Still looking for my 140mm. The Koolance 140's That i have now are great 2200RPM 91.2 CFM but they don't have 3 wire with tachometer.

 

[paulhojda]

if you really don´t care about the noise and you´re using headphones go for the delta´s. otherwise you will need to put the computer in like another room(or maybe another house)those things are as loud as a hairdryer at max

 

[AMDFTW]

if you really don´t care about the noise and you´re using headphones go for the delta´s. otherwise you will need to put the computer in like another room(or maybe another house)those things are as loud as a hairdryer at max

there expensive and SUUUUPER loud so his rents will hear them