Help !

[rxsharkey]

If I buy some braided cable extensions, can i plug them directly into my corsair ax760i psu. Or do i have to use them as just extensions?

 

[BranField]

I'm pretty sure you will only be able to use them as extensions however i know that corsair have released some braided cables for their specific psu's so you might want to check them out.

 

[Deejeta]

Corsair have their specific kits that go directly out from the back of your psu.
Like the kit see here:
http://www.pccasegear.com/index.php?main_page=product_info&products_id=20946

Any other sleeved cable you would most likely come across will just be an extension. They look just as good in most instances.
http://www.pccasegear.com/index.php?main_page=index&cPath=19_1251_1336

 

[airdeano]

you can buy extensions for any power supply, but for braided cable replacements
sorry to say, but at this time, there are no released cables (braided or otherwise)
available for the AX760i/860i power supplies. they are a totally different cable arrangement
than the AX750/760/850/860 (non-i series). you'll prolly fry something as the pinout
may be different from those series. know that the 24-pin is different unless the set is
designated as AX760i or AX860i do not buy them. PERIOD.

 

[Deejeta]

HX kit seems to work for this guy.
http://www.youtube.com/watch?v=buxWWtvLAjw

Sure the 24pin is split into 10&14 on the rear of the psu. Still just a 24 pin at the end of the day. If anything the latch on the end of the 16awg cable end will be of no use.

Here is the corsair sleeved cable matrix.
http://www.corsair.com/us/media/cms/manual/PSU_Sleeved_Compatibility_Matrix.pdf

Maybe TTL could help shed some light on this subject. Tom???

 

[airdeano]

dudes just using peripherial power cables from the HX kit..

the HX doesnt have indie 24-pin, so those are extensions for the i-series
24-pin cable.

and the OP is describing AX760i not the 1200i...

 

[BranField]

i suppose you could try sleeving your current cables. as i understand from looking through posts on this forum it is relatively simple but time consuming. im tempted to try it myself tbh

 

[CPMFW]

i've just finished braiding my ax760i cables yesterday, feel free to have a look

 

[Deejeta]

You did a fine job on your cables CPMFW. Looks the business.