hi guys im new to this forum i would like to ask for a advice on something that i dont quite understand
im looking to buy swiftech apogee drive II for socket 2011 so i have a questions about fittings compressions fittings .so this is my plan
i have nzxt switch 810 case so basically i will have 360rad on roof and rear 140mm singe rad (reason why i wanna have extra rad is because for me personally it looks more pleasing to look at then just having a rear fan) and and then i will have a reservoir (tube looking 1 bits power water tank 150mm) .so basially i will have loop going to radiator top 1 and then one loop from apogee drive going to reservoir then i will have another loop connecting my TOP RAD to my REAR RAD and then i will have a loop from that rad going to reservoir i hope u guys understand like i said its my first time doing this .and i have plan how i wanna do it i want my loop to be straight all the way no curves and any of that ghetto cooling .so my big issues is the compression fittings im not sure how many i will need and also i dont know what brand i should get bits powers black looks nice but they cost a bit in Australia also can i for example use bits power fittings and example koolance or swiftech fittings together or they all must be the same brand for comparability reasons ?if u take a look at my attachments u will see exactly what i wanna do make it look as best as i can but im working based on build thats on that pic i also only gonna watercolor the cpu.i hope i wasnt being too much of a pain the last thing i want is to start and then run out of fittings and things .also what brand of fittings should i get im kinda on the budget atm.the problem i have is like i read online and they all say u need angle fittings extenders and all this other crap that i get confused as hell
anyway thanks guys and big hello from Australia
im looking to buy swiftech apogee drive II for socket 2011 so i have a questions about fittings compressions fittings .so this is my plan
i have nzxt switch 810 case so basically i will have 360rad on roof and rear 140mm singe rad (reason why i wanna have extra rad is because for me personally it looks more pleasing to look at then just having a rear fan) and and then i will have a reservoir (tube looking 1 bits power water tank 150mm) .so basially i will have loop going to radiator top 1 and then one loop from apogee drive going to reservoir then i will have another loop connecting my TOP RAD to my REAR RAD and then i will have a loop from that rad going to reservoir i hope u guys understand like i said its my first time doing this .and i have plan how i wanna do it i want my loop to be straight all the way no curves and any of that ghetto cooling .so my big issues is the compression fittings im not sure how many i will need and also i dont know what brand i should get bits powers black looks nice but they cost a bit in Australia also can i for example use bits power fittings and example koolance or swiftech fittings together or they all must be the same brand for comparability reasons ?if u take a look at my attachments u will see exactly what i wanna do make it look as best as i can but im working based on build thats on that pic i also only gonna watercolor the cpu.i hope i wasnt being too much of a pain the last thing i want is to start and then run out of fittings and things .also what brand of fittings should i get im kinda on the budget atm.the problem i have is like i read online and they all say u need angle fittings extenders and all this other crap that i get confused as hell
anyway thanks guys and big hello from Australia
