Haswell

dre92

New member
Simple question, I am building a new rig, should I go Ivy Bridge now or wait for Haswell? Will Haswell significantly beat Ivy Bridge's performance even when it comes to overclocking?

Regards,
Dre
 
How can we know how good a chip overclocks if it's not released yet?

If you need your computer now go Ivy otherwise wait and see.
 
depends on what you have now ,but what i've read so far, better onboard graphics
going to be clocked the same as ivy so your guess is as good as as anybody
 
Right now I have E7400 at stock, 4GB DDR2, and Nvidia 9400 GT. And i really need a new rig because playing modern games like BF3, Crysis, etc is not an option because I had to run them at the lowest settings possible and it sucks.
 
Haswell is speculated to be released in June, which is half a year away.

While I don't know much about the performance difference given everything now is just speculation, Ivy would probably be better to go with for now. Nobody wins the waiting game.
 
You should be able to keep the Ivy even after the Haswell are being released as I am sure the performance boost will not be much higher than the current gen. There are people still using the Sandy and are still very happy with how they perform. I wouldn't wait.
 
Hey, Noz_God, I noticed that you have a high end rig there. Do you want to upgrade right away to Haswell when it is released? Because if I go Ivy Bridge now, I would probably get the same question later in June.
 
You should be able to keep the Ivy even after the Haswell are being released as I am sure the performance boost will not be much higher than the current gen. There are people still using the Sandy and are still very happy with how they perform. I wouldn't wait.

Its because Sandy is pretty much identical in every way, Ivy is just a die shrink to use less voltage.
 
I saw TTL's video which explained why the shrinking made Ivy Bridge runs hotter than Sandy Bridge. Do you guys think the same thing will happen with Haswell? Or is it a totally different theory?
 
Based on your current rig specification, you should jump to sandy / ivy bridge + get a decent gpu (GTX660ti - HD7950). You will see a major increase in performance.

You don't need to update your hardware every time a new architecture comes out, so when haswell comes out you can still be rocking this rig for 4-5 years, just needing to update the gpu, when you want to.

Plus some of the questions you're asking are unanswerable mate, haswell isn't even finalised meaning the full specs are not out there and without information being released by intel it's impossible to say.
 
Based on your current rig specification, you should jump to sandy / ivy bridge + get a decent gpu (GTX660ti - HD7950). You will see a major increase in performance.

You don't need to update your hardware every time a new architecture comes out, so when haswell comes out you can still be rocking this rig for 4-5 years, just needing to update the gpu, when you want to.

Plus some of the questions you're asking are unanswerable mate, haswell isn't even finalised meaning the full specs are not out there and without information being released by intel it's impossible to say.

Well I just want to see what people think about Haswell especially those who already have Ivy/Sandy Bridge rig. I'm sorry if I ask the wrong question, but thank you for your advice though, I guess Ivy Bridge will remain powerful for a long time.
 
I saw TTL's video which explained why the shrinking made Ivy Bridge runs hotter than Sandy Bridge. Do you guys think the same thing will happen with Haswell? Or is it a totally different theory?

That's one part of the theory. Remember that the thermal paste used under the IHC was terrible. Haswell's a different story - it's going to use the same process as IVB but with a new, albeit similar, architecture. The power draw is being reduced, and I imagine it will be cooler than IVB. These are all estimations.

That being said, there is no reason to wait for Haswell. It's a long way away.
 
The current gen of intels are doing great. Are you mentioning Haswell just cause you want to have the latest generation of intel CPU's, or you want something that will perform good in any circumstance?
 
Its because Sandy is pretty much identical in every way, Ivy is just a die shrink to use less voltage.

Ofcourse Stevo, it's just that older intel CPU's are still satisfying their owners (2500K, 2600k, etc.) and i am sure some of them haven't upgraded because it isn't necesary yet.
 
Last edited:
I will be making the jump to haswell. However, this is for a largely a different reason.

I want to keep my old kit running in a home server. All I would need is: Drives. The Haswell CPU, RAM and a 1150 mobo (1150 I believe has been confirmed, and that its mounting hardware is the same as 1155)
 
Back
Top