Graphic motherboard watercooling braintickler

[SparkleDJackson]

Hey dudes and dudettes Not sure which topic this should be under so i just plonk it in here.

1. My motherboard tray has seven slots

2. I havent seen too many boards with that many slots. But with Spaces instead you know what i mean

3. Im going to sli when kepler drops

4. That means that 4 tray slots are instantly wiped for items

5. I also want to install a fairly high end soundcard capable of 5.1 at the very least and a killer network card so that means all 6 mobo slots are occupied by 4 items

I am going to be watercoolin this to within an inch of its life so both gtx6xx will be w/blocked like a boss. Would this allows me to get single slot expansion brackets to replace the standard dual slot so i could maybe use the slot in between the cards for the network card to leave the extra slots free to be filled with other good things maybe a blackmagic intensity pro for example. I know that the dual slot acts as structural reinforcement but if a have a 1/2x3/4 tube connecting the two cards those babies aint going anywhere but aurora filled heaven.

Is what im taking about possible or am i asking too much lol

Any of your guys insights would be wonderful

Peace

Dj

 

[tinytomlogan]

Keplar will be next summer before anything decent is released cos they are doing it backwards, ie: low first and work up.

 

[SparkleDJackson]

Cool. I was gonna get a gtx 550ti in the mean time and flog it to the guy i work with when mass effect 3 comes out or depending on what deals are about on the 560-570 cos tbh hes a bit of a tightwad and doesnt want to buy anything over aroud 120 so im gonna take a little hit to get me going after i get all my windows rads cables other swanky bits and x79 setup in er. So time wise im good but is the fitting of stuff between cards possible with a single slot bracket?

 

[mrDMxtreme]

its gonna be tight :S

but if msi comes out with a big bang or something like that you might have an easier time with all those cards