faulty mushkin 2133mhz redline?

Xellex

New member
last week I'd got myself a 3570k, sabertooth z77, and 8GBs of mushkin redline ridgeback 2133mhz (9-10-11-24 1.5v) kit. I'd set up the ram to run in xmp in the bios which was all fine. Thursday just gone (a week of possessing the system) it has just completely failed. I had had it up for about 4 days, using around 5GB/8GB ram, and this is when the blue screens begun. Continuously, the reason is "MEMORY_MANAGEMENT". I tried tweaking with the settings, to get it to run at 1333mhz, at 9-9-9-24 1.5v. I was still getting blue screens when i ran a prime95 test on the ram almost instantly. Had some spare mushkin blackline (9-9-9-24) 1.5v, which i put in and that seems to be working flawlessly. Faulty ram..?

I'm having hell with hardware this month, 2nd piece broken so far.. :/
 
yes as lardan said, do a memtest and if they are faulty you will get an error. You might have to leave it running for a while... When I had faulty Ram it took about 30 seconds to find an error on the first run and 4 hours to find an error on the next.
 
I am running 16gb mushkin redline ridgebacks (2133 mhz) .

The settings I am running 9-11-10-28 @ 1.65 volts

And they are running as spec.
biggrin.png


Hope this helps.
biggrin.png
 
This may be a very silly question but does that motherboard support that ram? Just recently I had to get new ram as the ram I had was not supported by the motherboard and because of that caused bluescreens
 
last week I'd got myself a 3570k, sabertooth z77, and 8GBs of mushkin redline ridgeback 2133mhz (9-10-11-24 1.5v) kit. I'd set up the ram to run in xmp in the bios which was all fine. Thursday just gone (a week of possessing the system) it has just completely failed. I had had it up for about 4 days, using around 5GB/8GB ram, and this is when the blue screens begun. Continuously, the reason is "MEMORY_MANAGEMENT". I tried tweaking with the settings, to get it to run at 1333mhz, at 9-9-9-24 1.5v. I was still getting blue screens when i ran a prime95 test on the ram almost instantly. Had some spare mushkin blackline (9-9-9-24) 1.5v, which i put in and that seems to be working flawlessly. Faulty ram..?

I'm having hell with hardware this month, 2nd piece broken so far.. :/

My bad, they were running at 9-11-10-28 1.65v, i took a bad guess :L
 
Back
Top