Fan controller help

[Genesius]

Hi, I'm looking for a fan controller that uses the temperature info from the motherboard. That way I can just set up fan curves for each fan when on auto mode.

I want my rad ka for fans to run off of auto mode because, my extra gpu fans to run off of a probe and then my case fans to run off of probes too.

I bought the Bitfenix recon, but it's not really doing what I want. The manual control works fine, the auto just works off the probe temps. This isn't so bad, I'm using the phoebetria software but it doesn't save my auto fan curves after I reboot. So the whole unit may as well just be a manual controller.

Anyone got any ideas?

 

[Namron]

The Aquaero 5 will do all this & more. I'm in the proccess of doing a "BASIC GUIDE" for the Aquaero 5 e.t.c...

As your Air cooling I've linked direct to the correct post for setting up the Aquaero for Air cooling. Anyway give it a look, It might turn out to be one to consider for your needs..

You don't need to go for the more Expensive XT or Pro units, If your not too bothered about having the LCD Screen then the LT version (which is around the £50 mark or thereabouts) will do exactly the same as tit's more expensive brothers ..
You can still make full use of the unit using the free Aquasuite 2012 software the same as the other versions..

N.

 

[mastercrim]

This system is pretty sweet now its something to consider. Great guide by the way.

 

[Genesius]

Thanks for the guide. It gets so hot. Why they don't include the heatsink I don't know, and the drive bay mounts. The LT works out to £100 with everything it needs.

Still a brilliant product. The software is wonderful

 

[Namron]

Thanks for the guide. It gets so hot. Why they don't include the heatsink I don't know, and the drive bay mounts. The LT works out to £100 with everything it needs.

Still a brilliant product. The software is wonderful

Your welcome....... I agree, I think they should include the 20mm Heatsink as standard and Yeh!!... It can get quite expensive as you add more gear for sure...

There is going to be an Update of the Software/Firmware supposedly in the early part of March I believe to add & correct some bugs e.t.c...

Cheers for feedback much appreciated

N.

Originally Posted by mastercrim

This system is pretty sweet now its something to consider. Great guide by the way.

Thanks mastercrim, appreciate it & glad you found it usefull

N.

 

[Genesius]

i didnt know all of the settings were saved to the controller itself. i did a fresh install, kept the files from windoes, updated fimware and now im back to stock.lol. they should really stop the module accepting the same firmware over the old. i know not that it has to be installed on the aqaero so that the fans work straight away but im an idiot, and i like things idiot proof.