Error 0x80070037

[blair]

[font=arial, helvetica, sans-serif]Hi i got a USB 3.0 flash stick and tried to use it in my desktop and i got this error Error 0x80070037 tried it in different usb sockets same error all other flash drives work in the PC and the strange thing is the USB 3.0 stick works in other PC's fine why does that one stick not like my desktop?[/font]

[font=arial, helvetica, sans-serif]It appears to just disconect randomly disapears from My Computer if i unplug it and plug it back in it will carry on copying for a while then same thing again.[/font]

[font=arial, helvetica, sans-serif]cant compy anything from it get error straight away on desktop laptop fine.[/font]

 

[mArTyN]

Have you tried updating the drivers for your usb ?

 

[Pr3d4t0r]

drivers? they will be on manufacturers site

 

[blair]

i got USB 3 drivers and the memory stick installs its own device manager recognises it for about 30 secs then it will disconnect again.

tried uninstalling reinstalling nothing worked

 

[mArTyN]

Are you plugging it into a usb socket on the rear i/o panel of your desktop or into a front hub ?

If it will not work correctly when plugged into the rear i/o panel then I would return it for replacement.

 

[blair]

Ok it works in the rear IO but dont in the front and all there is is a USB 3 extension cable running from the back to front so using the same USB socket it doesnt work WTF? uSB 2.0 works in the front USB 3.0 socket and the USB 3.0 tick is working in the front USB 2.0 sockets the only thing not working is

Front USB 3.0 socket wont work with 3.0 Flash drive.

 

[airdeano]

either the chipset the front panel 3.0 is hooked to is at fault, the cable to I/O is faulty or

the socket on the I/O is faulty. and since the rear panel is grounded internally, the possibilty

of a grounding issue exists. i'd heard alot of case manufacturers had front I/O issues in

2.0/3.0, even to the extent that the issue "damaged" there perf. i'd contact the motherboard,

case and drive manufactures in that order. you know someone gunna blame the other for

the problems. is your 3.0 a pass-through cable system or motherboard header connection?

airdeano

 

[mArTyN]

Ok, so it looks like your flash drive is good. Try removing the usb extension cable and remaking the connections.

 

[blair]

the motherboard is fine all USB 3.0 work its only the extention/front IO that doesnt work ive contacted coolermaster strange that usb 2.0 works in it though.

to clarify

Motherboard = FINE

Flash Drive = FINE

Front IO/Extension = NOT FINE

 

[airdeano]

your front panel gets the signal from the mobo. like fan headers they burn out

or get distorted. the 2.0 and 3.0 signals are piped on two different lines.

airdeano

 

[blair]

ah k problem is, is it the socket or the adapter converting the lead from internal to external?

 

[mArTyN]

It could be either,but, you are narrowing it down. Most manufactures of usb devices do seem to hint that they should be plugged into the hard wired sockets on the rear i/o rather than into a hub.

At least when Coolermaster get back to you, you have tried various things and will have answers if they ask anything.

 

[blair]

ill try and get them to replace it all.

 

[mArTyN]

Hope everything goes well for you

.

 

[blair]

Cheers

Will update on how i get on.

 

[mArTyN]

Thank you

 

[KING_OF_SAND]

Are you using a flash voyager by chance?