Dimensions of the AQX pump

[Mindless-Moron]

i was wondering if anyone had teh dimensions of the AQX pump, or if anyone would be kind enoough to measure it. i want to watercool my stacker (althought hte timetable for impelntation has been set back and back) anyway i was wondering the dimensions for the aqx pump, i have room for the 120.3 but it might be a squeeze for the pump, unless i get alot of help in making an external resevoir (a fishtank) with submerged pump.

 

[bennywidag]

no idea about the dimensions, but i have a polarflo d4 between the back of the case and the 120.3 on the floor, and it has a cm or two either side, more without the 80mm fans in the psu plate, only thing is it is tight routing the tube to the components, have a look in the watercooling gallery

 

[Mindless-Moron]

many thanks to you sir, i was thinking of placing the pump at the front tho so i can cut around the grill in the bottom of the stacker for hte radiator, as for the backplate, mines currently empty, so lots of room in the base.

 

[Barkerd]

Ok got the AQX 50Z in front of me ...

Footprint is

74mm wide x 85mm long x 85mm high (inc pad underneath)

The barbs protrude another 20mm hence the measurements including barbs are:

74mm wide x 105mm long x 105mm high (inc pad underneath)

 

[bennywidag]

i used a

dremel

big hole i made. i wanted to put it at the back so it would be shown off in the window, but the window doesnt show it so it was pointless, oh well. your way is the best to go in function terms

 

[Mindless-Moron]

thank you all i should have some moeny soon, so i can buy the gear and if i ever get a new rig all i have to do is get some new blocks. as for the hole making i intend to make the holes bigger in the bottom since they're cut for 92mm fans, erm where can i get a dremel, a proper dremel not imitation, i've never ben able to find one in the sheds round me, is there an online store, i ask because i dont think it would be a competitor to phil, unless he stocked them.

 

[bennywidag]

i went to robert dyas a couple of times looking for them, once they had one, but it was reduced from 69 to 45 so i presume it was end of line.

http://www.tool-shop.co.uk/acatalog/Dremel_top.html

just google for dremel