Dimas Bench Tables V2

[Mr. Smith]

How much for the lid mod? I might downsize...

 

[sbrehm72255]

Those are Awesome looking, any chance that they are coming to the US anytime soon??

 

[mayhem]

1 you web site doesnt work

2) were can i get these in the UK as web sites are running out of stock

2) are you still selling them ver 2

 

[Pyr0]

http://www.chilledpc.co.uk/shop/index.php?cPath=136&osCsid=4d8c00ccb782813b245cea380d1a18ed

 

[mayhem]

no good they have none in stock of the 15mm spacing.

need 15 mm spacing on 3 x 120mm rad

http://www.chilledpc.co.uk/shop/pro...d=676&osCsid=4d8c00ccb782813b245cea380d1a18ed

No stock.

 

[Pyr0]

only place i've seen selling them in the uk

i'd try contacting tom and see if or when he can get more in (tom[at]chilledpc.co.uk)

or post on the forum

 

[mayhem]

only place i've seen selling them in the uk

i'd try contacting tom and see if or when he can get more in (tom[at]chilledpc.co.uk)

or post on the forum

Thks for that will do as the makers web site is bugged and you cannot access any part of it.

 

[mayhem]

talk about rocking horse poo ..... any one know were i lay my hands on one of these even if its second hand ...

I need to normal 15mm spacing for a normal 3 x 120mm rad.

 

[tinytomlogan]

Thought about going direct mate?

 

[bentleya]

Have you thought about over options? i guy in germany makes custom ones. Which i have.

And yes mayhem they are the blocks you brought off me

 

[PeterStoba]

Sorry for potential thread-jack-age, but, betleya, where did you get it from and how much? I like the pump mounting!

 

[bentleya]

Sorry for potential thread-jack-age, but, betleya, where did you get it from and how much? I like the pump mounting!

German forum, €100 including DEL

 

[mayhem]

yup then the blocks lol. they don't fit the mb apart from 1 but not a problem hehe.

Do u have the details for the guy in Germany . Ive ordered one even though there not in stock (been told they may have some still so expect a email tommorw) and cannot do direct as the web site is fubar.

If i cannot get one ill go your route bentleya.

PeterStoba your not thread jacking bud its a tread about these anyway so no harm done lol

 

[mayhem]

you know looking at that a bit closer i could fabricate that my self. can you do me a favour and knock up some close ups. this has give me a idea when i can get access to the factory again.

 

[bentleya]

you know looking at that a bit closer i could fabricate that my self. can you do me a favour and knock up some close ups. this has give me a idea when i can get access to the factory again.

i Can on thursday, i'm a way from net access and the case it;s self, Monday - Tuesday and Wednesday

 

[mayhem]

no rush mate just when you can. just so i can do a 3D mock of the case.

I have a idea that might work as it look to be pretty simple to do and maybe possible for me to copy.

 

[Dimas]

Hi Guys,

DimasTech is down for Upgrading to a better ecommerce site, it will take some time, probably 1 week.

for buying bench table in UK you can ask to chilledpcuk and about models available.

before september will be ready a new rev 2.5, that fix some bugs of the V2 and it's more easy to mount.

best regards

Andrea

 

[bentleya]

it;s a sheet of alu folded, welded and few bolts, but i had several designs that i was goign to do myself, then alphacool wanted me to do a review of the yellowstone block. So had no choice but to buy one .

 

[mayhem]

wow.

I dont think id be able to do it out of ali as i cannot get hold of the tools. But steel maybe possible.

 

[mayhem]

well the review is now now good as it looks like there is no more stock of this item in the 15mm triple 120mm config ...

So ARRRRRRRRRRRRRRRRRRRRRRRRRRRR

!!!! Mifed to peaces