cpu-z 1.25

[HARRY]

right guys i got i weird one here ,i was doing abit of tweaking and i uped my cpu voltage to 1.6 or so i thought, cpu-z says its 1.51 volts but mbm says its 1.6 im stumped .any one else had this problem? ive tried flashin the bios but its still dodgy

 

[nick25]

They can often report from voltages, as long as you have no other problems I wouldn'y say theres anything to worry about.

 

[HARRY]

its just that i want to give this 3.2 about 1.7v cos i unlocked the multi with a bios flash and its quite hard to get stable .i can adjust the rails on my psu if it helps

 

[Thickbrit]

Harry,what gat settings and v-dimm are you using and has your board been modified to correct vtt ? If you have a multi-meter i can tell you where to measure actual v-core.

 

[HARRY]

i was runnin a vdimm @3volts and no vmods but if your offering LOL i have chunky fingers and hands the size of a mobo so i aint attempting ive just adjusted the pots on my pcpac gonna see if that has worked

 

[HARRY]

nope still the same even mbm5 is reading it as under now