contact probs

[Epicurus]

I dont have a shuttle case.. I have a tower case with the side off.

just a normal MB in a case

 

[aXeR]

ahhhhhh stupid me (i did wonder how prommie fitted in a shuttle case) i just presumed

What setting do you have the fans that cool the cooler (cant remember wot its called as im tired and its getting late ) set too? maybe its not getting cold enuff itself which is reflecting on why you have higher temps?

 

[Epicurus]

That would be one serious case mod.

I have the ST so I am not able to control any part of the prommie

 

[aXeR]

ah right i hear you, speak to the pro i'd say im put a mear peon

 

[Epicurus]

I know that I have got higher FSB and its been OK.. but have never run prime95

how would I get better mem timings???

 

[aXeR]

Do you mean how do you set better timimings?

 

[Epicurus]

I want to get better timings.

 

[aXeR]

well u see those settings at "auto" you shud be able to change them to numbers yourself, im not sure how tight u can make your settings as i know nothing about ure ram, start at cas 2,3,3,6 and go from therem that usually works with most decent ram.

 

[Epicurus]

will try that tonight

 

[aXeR]

good luck

 

[Epicurus]

cheers

 

[Warlord Shigs]

warlord, wot mobo you got, is it an abit? ive heard they are a bit inacurate with their temp reading (wether this is fact or not i dunno) but the -29 mbm shows seems more feasable, i never pay much attention to wot the mobo says

ye sorry i took so long mate. its a p4c800 deluxe. im gonna try again 2day wen i get bk from work. but atm im gettin -15 in bios at 3.6gig @ 1.7volts

 

[Brwmogazos]

if youre having probs getting your fsb higher just disable the last two options of the game acceperator .

if not experiment with these options and youll see your mem scores go high

 

[Epicurus]

game acceperator - is that in the BIOS?

 

[Brwmogazos]

yes its all those settings that you posted...they call them game accelerator settings...

just disable the last two of them and see if you can go higher fsb wise

 

[Epicurus]

So I disable

Min RAS# active Time (tRAS)

Row percentage Time (tRP)

 

[mjh74]

Epicurus, did you manage to get your temps down? I am seeing -22c idle here but 0c under full load with prime95 and +6c with the case side on. The chip is a P4 Prescott 3.2ghz @ 4ghz (1.4vcore). Not sure what to do now, I've already tried reseating. Evap temp is at -46c....

 

[matisamd]

i use motherboard monitor to monitor temps.

with my barton 2500+ running at 1.8v 2.640Ghz idle -18 full load -7 full load with my st and running at 2.2ghz at default 1.65v idle -26.

I had a prob with the thing that is meant to protect smd components ware it moved while i was mounting the head so that i couldnt start up. and i acidently used standard thermal compund instead of the silver that came with it