Comsos 2 questions

[unknownuser200]

Hi i was wondering if anyone had the MAX height of the lower level of the cosmos 2. I was thinking with some heavy modding putitng a quad rad in the bottom and turning the psu 90*

 

[unknownuser200]

anyone?

 

[SieB]

At a guess i'd say about 200mm, if you look at the one Tom did with the rads in the bottom there is just enough room to fit them sideways and i'd say the rads are about 200mm wide.

http://www.youtube.com/watch?v=s6qBdXqSLlY

 

[unknownuser200]

wrong dimension lol i need up to down HEIGHT no width. the rads are just about to the top a enough the cables just clear so figure a 6 mm to do easy math. there at 124 mm height and there sitting on the hdd cage bracket which i can only guess of the thickness i need 150 mm in height. is the bracket 20 mm thick ? i have no idea thats more or less what im trying to find out. and iirc the bottom case is 250 mm wide. IE the front case fan itself is 200 mm its self. so i basically need the height of that bottom chamber if anyone has it. lot of money to spend on a case if i dont even know if i can use it for what i want

 

[SieB]

I'm meant hight dude, the rads on on their side so the width (not thickness) of the rads is about the same as the height of the lower section, give or take a few mm.

 

[unknownuser200]

lol how on earth did you get 200 mm? there 120 based rads the rad itself is 124 mm wide, or tall when there stood that way. there sititng on an HDD rack bracket. so there NOT sitting in the bottom of the case. Tom left that there because between that and the cables he did not have to secure them other then some double sided tape. I want to know how thick it is. if i have nothing in there at all lol

 

[SieB]

lol how on earth did you get 200 mm? there 120 based rads the rad itself is 124 mm wide, or tall when there stood that way. there sititng on an HDD rack bracket. so there NOT sitting in the bottom of the case. Tom left that there because between that and the cables he did not have to secure them other then some double sided tape. I want to know how thick it is. if i have nothing in there at all lol

I wasn't sure if there was bit extra at the top and bottom because of the brackets so I gave a few mm either way so that's why I said 200mm.

I'm confused now because you said height, as in bottom to top. So you want width as in left side to the right side?

 

[unknownuser200]

found this picture online , this is what i need to know

i asked coolermaster forums 146 mm i wonder what id have to do to modd it to to get that extra FOUR (4) MM

 

[kenny01924]

go to coolmasters web site they will give you the dimensions

 

[unknownuser200]

http://www.coolermaster-usa.com/product.php?product_id=3071&product_name=Cosmos II where? all they have is the external dimensions

someone on the coolermaster forums said its 146 mm anyway