Can't post to Bios

[Binzaman]

Hi guys just looking for a little help.

Just built a new rig this weekend. Give or take a couple of issues, managed to get the system up and running (Windows 7 installed) and working great. Decided I would try ASUS's UEFI ez mode. Switch to the Optimal setting and now the system won't even post.

Basic specs:

ASUS P67 Sabertooth

2500k

8G GSkill ECO Ram

Corsair AX850

ASUS 560 Ti

OCZ Vortex 128GB (as boot drive)

XSPC RASA 360 water cooling.

This is my first build.

Any ideas? How to I reset the bios so that I can boot?

Cheers,

Binzaman

 

[Grizzly]

There will either be a button or jumper marked CMOS on your board, look in the manual if you can't find it.

If your board doesn't have one there should be a battery somewhere on your board, like a watch battery, remove that for 5 mins, put it back in and boot.

 

[Binzaman]

Thanks for the reply. I managed to get it going with the Memok function. I will need to do some further reading before I try overclocking again.

Thanks for tip and will remember that if I get into trouble again.

Cheers,

Binzaman

 

[ruthless_villain]

dont use programmes to oc the cpu, for the gpu iz ok but neever cpu, always sets the volts to high :|

 

[Binzaman]

Thanks Ruthless. Will need to do some more reading before tackling my overclock.

 

[SirPhilby]

If you're lookingfor info on OC'ing just whore your way through youtube. I managed to get my i5 750 to 3.66 with my first attempt after a bit of research. Not a massive OC I know but with the gear and knowledge I was using I was pretty happy.