Best 120mm fan?

[Jadarite]

Hi Robot..., The 600T has the best 200mm fan for the case already the only other fan setup you could try is 4x noctua NF-R8's in the front (intake) this will need a little bit of modding, 1x noctua p12 (3pin) in the drive bay (intake), 1x noctua p14flx in the back (exhausts) with a H100 useing 2x noctua NF-F12pwm in the top (exhausts), but this will be a negative pressure in the case the only way to get close to a positive pressure is to have all the fans as an intake but i would not recommend giving positive pressure a try in this case.

 

[Robotdinosaur]

Hi Robot..., The 600T has the best 200mm fan for the case already the only other fan setup you could try is 4x noctua NF-R8's in the front (intake) this will need a little bit of modding, 1x noctua p12 (3pin) in the drive bay (intake), 1x noctua p14flx in the back (exhausts) with a H100 useing 2x noctua NF-F12pwm in the top (exhausts), but this will be a negative pressure in the case the only way to get close to a positive pressure is to have all the fans as an intake but i would not recommend giving positive pressure a try in this case.

Thanks, do you know any other cases which have good airflow?

 

[RedgyK]

Thanks, do you know any other cases which have good airflow?

Haven't really read all of the replies and stuff in this thread, but for airflow, the RV02/FT02 or RV03 are really, really good.. One of the best when I bought my RV02 at least.. Only threat to it was the HAF 932 (correct me if I am wrong, might have been one of the other HAF's)

Might wanna check it out

EDIT:

Also check out some of Tom's videos with the RV02 in it, think he might have a review too, not sure however..

 

[| raVen |]

Thanks, do you know any other cases which have good airflow?

Raven RV03 mate have really good airflow mate, and I mean really good.I had this case for about 8/9 months(I still have it but I'm not using it anymore and its siting on the top of my wardrobe

)

 

[Jadarite]

Thanks, do you know any other cases which have good airflow?

You might want to have a look at the Nzxt Phantom 410, Nzxt Switch 810, Bitfenix Shinobi, Bitfenix Raider or stay with your choice of the fractal design Define R3

 

[Robotdinosaur]

These are the cases im looking at at the moment:

corsair 600t

corsair 550d

Define r3

Define XL

RV03

which one is the best? im thinking more the 550d

 

[Jadarite]

These are the cases im looking at at the moment:

corsair 600t

corsair 550d

Define r3

Define XL

RV03

which one is the best? im thinking more the 550d

At the end of the day it's got to be your choice my friend but if i didn't get the 600T then i probably would have got the 550D or the Define XL

 

[RedgyK]

These are the cases im looking at at the moment:

corsair 600t

corsair 550d

Define r3

Define XL

RV03

which one is the best? im thinking more the 550d

I wanted to get the Define XL before I got my RV02, because I wanted a quiet case and I thought the R3 would be too small (Would have been big enough, but I like a bit of extra space.) I didn't go for the XL though, because I heard the airflow wasn't too good, the airflow is decent if your CPU and GPU's have decent coolers (mine are reference, which imo are bad on the 5xxx series, at least they make a lot of noise).

So, went for the super airflow case, it's actually pretty quiet (not R3 quiet though), and it pushes enough air into the GPU's too keep them quiet.

I always have liked the look of the Corsair 600T in white, don't know about the airflow of it though.

Don't like the look of the RV03, though some might..

Imo I would consider the RV03, 600T White or Define R3...

Just my thoughts, hope this makes a bit of sense to you, maybe even help you a bit

 

[Robotdinosaur]

Thanks for everyone's opinion and help. I think I'm going to go for the Define XL as its a bigger version of the define r3 and I like the look of the R3 alot so i think it will be the best choice for me.

 

[RedgyK]

Cool! Be sure to post pics when it's done! Always liked the look of that case

 

[Brutos]

Akasa Vipers are very good i have a few on my case and they shift a bit of air , noise wise they very good also

 

[Ru5ty_t00l]

Akasa Vipers are very good i have a few on my case and they shift a bit of air , noise wise they very good also

I have few vipers too .they're pretty powerful but on full speed they're not very quiet

 

[EventHorizon27]

Saw this posted on another forum, doesn't cover many fans but may be helpful

[media]http://youtu.be/rGK-QO8yf6Y[/media]

 

[hoofhearted4]

i would recommend Cougar Fans. they are silent and move a good chunk of air. amazing for case fans. idk about for Rad fans cause idk about their static pressure and all that.

 

[airdeano]

for a radiator app, the noctua F12 would be the deamiest, AP 15 next. but for general case flow the P-12 would be as well

off because you may not be looking for a jet flow stream. as well as the sprectres, and cougars. but it does depend on what

job it is needed to do. it will all depend on the case first, so you'd have to make that decision and then the fans will come.

airdeano

 

[airdeano]

Saw this posted on another forum, doesn't cover many fans but may be helpful

sounds like someone had been watching Tom's videos and brought in a chesty MC to provide narration. nice touch, but Tom's flair makesup for the knockerless

production.

airdeano

 

[Stevo]

Scythe Gentle Typhoon 1850/r, for case fans. and Noctua NF-F12's for radiators

 

[| raVen |]

Saw this posted on another forum, doesn't cover many fans but may be helpful

[media]http://youtu.be/rGK-QO8yf6Y[/media]

Nice BLONDE

 

[BKCXb]

Saw this posted on another forum, doesn't cover many fans but may be helpful

[media]http://youtu.be/rGK-QO8yf6Y[/media]

SHIT!! that was a fan review??? guess I gotta watch it with the sound up now!!!

 

[tharionos]

woef

i diden't pay much attention to her talking

diden't know what language she was speaking till i noticed it was english lolmao