Attaching tubbing to the inside of the case

[ShadowNoon]

Hey guys, i just wanted to ask if there was a way to attach tubbing to the inside of the case. If you're using metal pipes, it's not a problem, you can go from the top rad and straight across the top of the case (under the rad).

To further explain:
http://i.imgur.com/s9TTj.jpg

See how B-NEGATIVE has the pipes going straight across? Well i'd like to not have fans at the bottom and run tubing straight across in a similar fashion (to a bay res). Is there a way to sort of.. Attach part of the tubing to the inside of the case? It's just so that the tube doesn't just droop down and go over ram or whatever.

It's purely for asthetics, i've thought of drilling a small hole and using cable ties (the tubing will be black aswel as the case, so you won't see the cable tie) but i figured i'd ask if there was a real component to help me.

 

[B NEGATIVE]

You can use something like this,you can bolt it to a fan mount on the underside of the rad.

http://www.kiowa.co.uk/products/cf2_standard_twin_polypropylene_pipe_clamp/FCF2A16

 

[ShadowNoon]

You can use something like this,you can bolt it to a fan mount on the underside of the rad.

http://www.kiowa.co.uk/products/cf2_standard_twin_polypropylene_pipe_clamp/FCF2A16

Thanks, has it been done before? I'd love to just use piping like you have but i really, really don't have the experience for it.