ATI Radeon 4850 toxic/vista Home Premium

byestream

New member
Can anyone advise?

Running the above graphics card from my HTPC with one DVI/HDMI output connection to my projector, I wish to connect the other DVI output to a mini monitor. The 4850 card has two set up resolutions which appear to be independent to each other, the projector is set up at 1920X1085 and the monitor is set at 848x400 resolutions , the problem is that the monitor only displays the windows scenic display without the icons???
 
You may be set to dual monitor instead of clone. I am not sure if you can have 2 different res on clone mode.
 
two displays

thanks for your response but with 'clone' its exactly what it means the resolution would be the same as main application in this instance the projector is 1920 x 1085 setting both (as I found out) to this resolution causes the monitor to display 'out of range' meaning of course that this resolution setting is beyond the monitor's capability and the monitor's display is distorted

regards.
 
Are the icons on the projector? If so just switch which one is your primary display. Either that or drag everything across...
 
name='byestream' said:
Can anyone advise?

Running the above graphics card from my HTPC with one DVI/HDMI output connection to my projector, I wish to connect the other DVI output to a mini monitor. The 4850 card has two set up resolutions which appear to be independent to each other, the projector is set up at 1920X1085 and the monitor is set at 848x400 resolutions , the problem is that the monitor only displays the windows scenic display without the icons???

hello guys, just new here and i need help which vga cooler will be sure to be compatible with my vga ati radeon hd 4850. i tried zalman and arctic cooling vga cooler as they said that compatible to hd4850 and both are failed. everytime i power up my pc, i can see on the screen memory dump message and shuts down my pc. later on, i observed that the original vga cooler of my vga card is having a small square about 1cm a bit higher from the main heat sink of the cooler on the part which is going to touch on the gpu in which the 2 vga cooler that i tried to use doesnt have. is it a possible problem? thanks a lot guys.
 
Back
Top