3700@3GHz with nventiv mach 2

[Psydrop]

Hi!

According to speedfan my system is running @ -17 idle and -15 according to Bios(AsrockdualSata) with a vcore of 1.55.Having major problems to go beyond 300fsb.

System

Asrock Dual SataII 939 vcoremod

Amd 3700 KABCE 0542

2*256 A-data PC4500

 

[boardy]

Voltage mate. It's not enough Vcore

 

[maverik-sg1]

Also the LDT voltage should be set around the 1.4v mark and also makse sure you reduce the HTT multiplier to x3

 

[Psydrop]

Voltage mate. It's not enough Vcore

thx....then i have to wait until i order a DFI but not sure which one i will buy of the following:

http://us.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PAGE_TYPE=US&PRODUCT_ID=3872&SITE=US

or

http://us.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=3469&CATEGORY_TYPE=LP&SITE=US

The HTT multiplier was set to 3.

 

[boardy]

This is the problem I had with the AsRock mobo. There just isn't enough voltage to set

I'm on a DFI SLI-DR now and I have to say it's an awsome mobo!!

Don't go for the EXPERT with Phase cooling. They really flake under Phase.

 

[Psydrop]

This is the problem I had with the AsRock mobo. There just isn't enough voltage to set

I'm on a DFI SLI-DR now and I have to say it's an awsome mobo!!

Don't go for the EXPERT with Phase cooling. They really flake under Phase.

Thx you think i should go for the DFI SLI-DR ?

 

[maverik-sg1]

Phase cooling stick with the DR mate - you cant go wrong with that.

Mav

 

[Psydrop]

I'll take you up on that mate i will go for that hope it will like my a-data pc 4500, could you also recommecnd a good power supply i was thinking of hiper 580w

 

[boardy]

Stay away from Hiper, I've heard some not good things about them. Go for Tagan 580w unit I'm using one atm and I'm VERY impressed, it's so quiet but very very powerfull.

Boardy

 

[Psydrop]

ok tagan sounds good but a bit expensive at the moment so how about this

http://www.ocztechnology.com/products/power_management/ocz_modstream_power_supply

 

[Bradmax57]

Stay away from Hiper, I've heard some not good things about them. Go for Tagan 580w unit I'm using one atm and I'm VERY impressed, it's so quiet but very very powerfull.

Boardy

Im using the Hiper 580w one now and cant fault it, maybe im lucky but i can clock better than I could with my enermax liberty or even my pcp&c 510 sli one, on the other hand Ive had 2 Tagans and both imo sucked they were not the 580w one mind you

 

[stocky]

When the Hiper's first came out there were a lot of news of them failing or having wooly lines. However recently I have only heard good things about them; so maybe they have either improved their components or their quality testing in production.

 

[K404]

Back to the OC....its possible you`ve hit mild coldbug. My new CPU will do 404+ on water (low multi) but it wont pass 297 under phase.

Messing with drive strengths *might* help whwn you have the options on your new mobo

Good luck either way!